Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Post pics of your builds....
New Posts  All Forums:Forum Nav:

Post pics of your builds.... - Page 610

post #9136 of 9592

Hi All;

 

Finished this about a month ago.  Sounds great!  Build is mostly stock except for SUMR transformer and a splurge on Vampire connects.  A posting by Stixx gave me the idea for the case.

 

 

 

 

Thanks for looking,

Jim

post #9137 of 9592

Nice casework, muskyhuntr, 

post #9138 of 9592

 

I am uploading pics in the gallery for my KGSSHV on board build.

The best SS for electrostatics, but bested by the BHSE and T2.

I am posting because I would like to encourage everybody to get on the DIY wagon.

Nothing more satisfying than listening to your own build. No amount of money can buy that.

Thanks to Kevin for his designs, To Spritzer for his building ideas.

 

 


Edited by gilency - 5/22/13 at 11:03pm
post #9139 of 9592

Nice looking stat amp. Can't wait to hear it with the 009!

post #9140 of 9592
Look forward to see you guys at the LA meet smily_headphones1.gif
Lots of very nice builds here. The Bottlehead is a piece of art.
Post moar!
Edited by gilency - 5/23/13 at 12:44am
post #9141 of 9592
Quote:
A posting by Stixx gave me the idea for the case.

 

Thanks mate!

 

I am flattered smily_headphones1.gif...

 

I definitely like your build!

I sold my M3 last year to a happy camper in

the Netherlands driving K1000's with it.
 

post #9142 of 9592

So many beautiful things being built... here's an ugly utilitarian one but it comes handy when testing stuff. It's a simple sine generator based on the xr2206. Project is based on the schematic/pcb here: http://www.loetstelle.net/projekte/xr2206neu/xr2206neu.php

 

Goes from 1hz to 100khz (extreme distort too much to be useful to be true). Plenty of room inside the box still so I'll add a small board to turn the sines into square waves later on (which probably means next year...).

 

 

 

 

 

Unrelated to headphones but in the utilitarian spirit, here are a pair of DI boxes (Bo Hansen 1975 models). Gotta love how tough those little hammond boxes are.

 

post #9143 of 9592

I got these in the mail today... biggrin.gif

Put one together. I'm currently trouble shooting it, I shall let you all know how it sounds once I've got it working properly. Looks cool at the moment at least!

 

and a good day to all

 

chris

post #9144 of 9592

How crispy are your Chicken's?

post #9145 of 9592

Is the BUF634 in the feedback loop of the opamp? I've had great success with this circuit- http://www.ti.com/lit/an/sboa065/sboa065.pdf

post #9146 of 9592

My chicken's good- rather crispy. (at least the legs were, i didn't try any other parts today ;))

 

The buf-634 is simply providing a virtual ground for the opamp. I've found it to be a fairly good component for this, it puts out a lot more power than any op amp I've ever tried in it's place. I love the TO package too, theyre really easy to route/mount, high power output, yet still more compact than say, a dip package

 

I'm using a 4556 which I've found so far to drive my headphones beautifully without any extra help.  I have yet to find another with more output power (which is one of the most important specs for running headphones directly I've found.

 

Keep in mind that my headphones are pretty low impedence compared to most so my requirements for power are on the low side.

 

I'm still rather interested in trying a buffered design, maybe once I've ironed all the kinks out of this one. 

post #9147 of 9592

Link to the kit?

post #9148 of 9592

I've swapped out the simple (yet silly) MOSFET follower buffers in my Parasound D/AC-1600 with OPA134/BUF634 composite buffers. For unity gain the implementation is as simple as it gets- just hook the two together as seen in TI paper and power them up. Just be sure that the opamp is stable in this config and the buffer chip must be fairly high bandwidth. The benefits of this is that you essentially get the performance of the opamp with much improved current capabilities. I've biased the BUF634 in high bandwidth mode and this means that at 18V it will give out a ton of heat- therefore be sure to heatsink it. For lower power dissipation applications an smd package might be good.

post #9149 of 9592

Defqon, were you aiming that question at me? This is my own design. I'm considering selling some pcbs or maybe made up boards if there's demand, but this is just a prototype that you're seeing at the moment. (I'm calling it the Micro-Moy)

post #9150 of 9592

Ahk np CrispyChicken :)

New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Post pics of your builds....