Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Elpacs on EBay for half-decent price
New Posts  All Forums:Forum Nav:

Elpacs on EBay for half-decent price

post #1 of 3
8/18/04 at 11:58am
Thread Starter 
No relation or interest to seller, just ran across these on sci.electronics.equipment and thought they might be of interest to someone. They appear to be Elpac WM063-1850-D5 linear (I think) regulated wallmounts (13 of them) for $15 each. +/-12V, +5V. Would work nicely for a wall powered split-PS application (similar to the one I used for my MINT). Hopefully posting this isn't in violation of head-fi rules as I have absolutely no interest in these other than having used a similar one, and it beats the $41 Digikey charges for these.

here
Reply
post #2 of 3
8/19/04 at 10:14am
Wow, that's really cheap, but I'm not so sure if the specs are that good:

Quote:
Output:
Combined regulation: ±5%
Set point: ±3% at 60% load
Ripple/noise (VP-P) :±0.5%
Hmm... how is 0.5% for noise? Would that hum?
Reply
post #3 of 3
8/19/04 at 11:20am
Thread Starter 
Quote:
Originally Posted by chillysalsa
Wow, that's really cheap, but I'm not so sure if the specs are that good:

Hmm... how is 0.5% for noise? Would that hum?
Same specs as the normal Elpacs used or recommended by Tangent (WM080?), the ones used for Gilmore Lites (WM072 or WM071), etc. Main difference for these is the +5V tap (and probably somewhat lower current on the +/-12V taps as a result, but haven't checked the specs that close).
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Elpacs on EBay for half-decent price