I have a six pin male that is attached to a six pin female Stax extention cable. The inner wires of the six pin female part has become detached. Can you tell me the proper configuration of the wires; so that I can re attach them with solder. there are three white wires and three red wires. Thanks.
Detached Stax Six Pin Extention Cable- Help!
Head-Fi's Best Sellers
- 3,769 Posts. Joined 3/2002
- Location: Long Island N.Y. Reduced To The Masses.
- Select All Posts By This User
If you have a multi meter you can do a continuity test using the ohm setting(beep). Plug the 2 connecters together but not all the way in so you can access the pins on the male connector with one of the meter probes & the other probe on the wire that came off the female part & listen to the beeping noise touching the broken wires.Once you get continuity solder that wire to the female connecter.