Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › Rockbox for iBasso DX50 + cwm recovery Latest Update: 2014-07-30
New Posts  All Forums:Forum Nav:

Rockbox for iBasso DX50 + cwm recovery Latest Update: 2014-07-30 - Page 47

post #691 of 1117
Ou
Quote:
Originally Posted by kingdixon View Post

How is the size of the mamba compared to the dx50 ??


Well as for rockbox, i kept switching back and forth too many times and felt confused, at the end i felt that i tend to like the warmth of the stock firmware, but everybody else seemed to like the neutrality of rockbox and even said it had more details, so due to these opinions , also due to my confusion and finding it hard to settle which is better + rockbox features from playlist to equalizer and crossfeed.

I ended up with rockbox without looking back, and its great for me.

You have to try it anyway..

Same here looking forward to next stock firmware !!
The D42 is about 1/4 inch shorter in length(end to end) width is about the same and height is really close to. For the most part it is a good match. And it takes a 9volt so if it dies just put another one in. It will last about 12 hours wth the battery I use, and just like the DX50 the bass will distort when the battery is dying.
post #692 of 1117

I tried to copy fonts into the font folder of a rockbox....zip it up... transfer to internal  memory... then recovery mode.. I chose to reinstall from zip... it starts and then immediately says installation abort... Also whenever I start to play songs and maybe after 30 minutes to 40 minutes.. my dx50 would freeze and I got to manually shut it down by holding the power button and restart it again,,,

 

Anyone has any ideas? my aim is to be able to read Chinese text... on the official firmware... Chinese text are being displayed correctly... anyone can give me a step by step guide... should I then reflash? etc.... some detailed instructions would be helpful

post #693 of 1117

Anyone tried the dac Stoner Acoustics ud110  with Galaxy s3 and could tell me if I get good sound like the dx50?
I have dx50 (without amplifier) but I want my cell phone to hear at least the same level quality sound

post #694 of 1117
Quote:
Originally Posted by cooperpwc View Post
 

 

After you reflash the OF, be sure to delete the Rockbox folder on the DX50 before reflashing Rockbox. That folder has your config file which is why the Runtime setting doesn't go away.

Hey fella. Heads up on this fix; it worked.

Thanks a lot

GC

post #695 of 1117
Quote:
Originally Posted by GC1971 View Post
 

Hey fella. Heads up on this fix; it worked.

Thanks a lot

GC

 

Glad it worked. :-)

post #696 of 1117

Sorry guys to enter the discussion in such a sudden way...but I'm pretty desperate!
I installed RB following the instruction given HERE and all worked fine, I used it for a couple of hours.
Then the bad idea: try to change the image for player selector, so I downloaded the zip at the same web page and installed it by the CWM recovery, result: i had a warning message that something had gone wrong, I rebooted the DX50 and after that my poor DAP isn't able to boot up anymore!! It keeps displayng the "iBasso Audio" boot screen...
I can only shut it down pressing the power button for some seconds, and just few seconds after it turns on again showing the "iBasso Audio" boot screen forever!
I'm still able to enter in the recovery, how can I fix it?
Wipe data / factory reset and then reinstall rockbox will fix it?
Thanks mate!

post #697 of 1117
Since you can boot to recovery you should be able to install either Rockbox or stock from a uSD card. If that doesn't work then you need to use rkflashtool or Rockchip Batch Tool to flash a firmware image directly to the device.
post #698 of 1117

i cant find the download of the last version, i can only find

 

cwm_rockbox_2013-03-25.zip

 

some noe can help? thanks

post #699 of 1117
post #700 of 1117
Thanks,
Can some one tell me how to create playlist?
post #701 of 1117
Thread Starter 

Please check the manual. Everything about playlist is well documented.

 

http://download.rockbox.org/daily/manual/rockbox-ipodvideo/rockbox-buildch4.html#x7-390004

post #702 of 1117

I LOVE what the rockbox has done for the sound! sq is brilliant, playing around with the cross feed and the eq, wow. just great in every aspect.

 

one question though: the interface is really sluggish, I read more about it in this thread, has anyone found any good cure to it yet? 3*3 grid works ok though I guess.


Edited by opis - 5/2/14 at 3:50pm
post #703 of 1117

Am I being stupid ( I hope so)?

I'm using the latest version of rockbox linked, but every time i push the power button to wake up the screen it returns to the main menu. I've selected "first button press only activates back light" from the settings yet every time I push the power button it activates the backlight and exits the wps. Meaning I have to select now playing every time i switch the screen on. It's not a massive issue, but its starting to get a little annoying. Any ideas?

 

 

Besides that (and the occasional crashes whilst changing eq settings) all is good. :bigsmile_face: 

post #704 of 1117

im geting problem while im trying to seee hebrew letters o=

 

when im chnage the UI Language to Hebrew all the letters are reversed.  i tried to change the codepage and fonts but it dosnt work...

same problem  whith music that uses hebrew letters...

any idea?

post #705 of 1117
Quote:
Originally Posted by Gitbags View Post
 

Am I being stupid ( I hope so)?

I'm using the latest version of rockbox linked, but every time i push the power button to wake up the screen it returns to the main menu. I've selected "first button press only activates back light" from the settings yet every time I push the power button it activates the backlight and exits the wps. Meaning I have to select now playing every time i switch the screen on. It's not a massive issue, but its starting to get a little annoying. Any ideas?

 

 

Besides that (and the occasional crashes whilst changing eq settings) all is good. :bigsmile_face: 

You've changed a setting that causes this - I'm not sure which one, but that's not how it works on mine. Check the hot key settings perhaps. If you can't find it you could perhaps delete the .config file and start from scratch. 

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Portable Source Gear
Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › Rockbox for iBasso DX50 + cwm recovery Latest Update: 2014-07-30