Head-Fi.org › Forums › Help and Getting Started › Introductions, Help and Recommendations › Logitech Z2300 to DAC, how?
New Posts  All Forums:Forum Nav:

Logitech Z2300 to DAC, how?

post #1 of 6
Thread Starter 

Hello, I just got used Logitech Z2300 and want to stick it to my DAC/AMP (Yulong U100) to use it as a dac. 

 

Just to make it sure here is a picture of it http://www.kidultdiagnostic.com/images/yulong/yulong-u100_03.jpg

 

And my Z2300 only has 1 way to connect it to devices: single 3,5mm cable http://litbimg4.rightinthebox.com/images/384x384/200911/yuch1259048961406.jpg

 

So I thought I need an adapter like this http://files.cablewholesale.com/hires/30r1-03260.jpg to connect it, but its not working properly! Right channel sound is very silent compared to other channel. But both the Z2300 itself works perfectly, (I tested it with my phone) and the Yulong and it's line out and the cable I bought all work, I tested. So why im getting silent right channel?

post #2 of 6
Thread Starter 

Bumb, apparently it still works if I connect it to Yulong's headphone out, but doesn't that decrease quality a lot?

post #3 of 6
Thread Starter 

One more bumb..

post #4 of 6

Well you have the right connector (RCA to Female 3.5mm), so it should work. I was going to say if they Yulong works and the Logitech both work independently, then the issue is with the cable itself... But you say the cable works? How have you tested the cable?

post #5 of 6
Thread Starter 

Thanks for your reply. I sticked my Sennheiser CX 300s to line out with that cable and they sound good, so it should work? Maybe I'll buy smaller adapter without cables or something.

post #6 of 6
Thread Starter 

Solved. The control unit of Z2300 sucks. I had to pull the volume knob upwards and the right channel came back. I was just lucky with phone. Sorry bout that.

New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Help and Getting Started › Introductions, Help and Recommendations › Logitech Z2300 to DAC, how?