SOLD Resonessence Labs Concero HP
Will Ship To: North America
For sell Like new Concero HP Computer USB and S/PDIF DAC / Headphone Amp
Sell will pay PayPal and shipping fees.
CONCERO HP is three things in one: first, it is the Resonessence upgradable FPGA DSP core with all the proven filters and algorithms of the CONCERO family; second, it uses the 32bit ES9018-2M Sabre DAC in both PCM and DSD modes to provide high quality audio; and finally it provides a state-of-the-art headphone driver capability.
The CONCERO HP delivers digital music directly from your computer USB or audio S/PDIF source to your chosen headphones with exceptionally low distortion (< 0.001%) and high dynamic range (> 112dB).
Similarly to all the CONCERO family, the CONCERO HP enumerates on the PC as a USB Audio 2.0 device (by use of our freely provided Thesycon USB Audio 2.0 driver), and natively on the Mac. But in addition, CONCERO HP also enumerates as a Human Interface Device (HID) which allows its volume control to drive the volume level in the music player directly. (Learn more about the volume control)
When internal up-sampling is being used (taking your 44.1kS/s or 48kS/s to 176.4kS/s and 192kS/s) pressing the center of the volume control knob cycles through the Resonessence up-sampling filters for you to optimize your listening experience.
( These last two features mean that no remote control is necessary with the CONCERO HP, but if you prefer to use a remote control, CONCERO HP responds to the Apple IR Remote just like the other CONCERO family members. )
( A configuration utility on both PC and MAC is provided to configure the CONCERO HP to use S/PDIF as either an input or as an output to enable S/PDIF bridge mode. This configuration utility is provided so that the CONCERO HP requires no remote control to access all the features. You can change the configuration as often as you like, the configuration you chose is stored in the CONCERO’s non-volatile memory chip. )
Important note: the volume level that you set on the CONCERO HP is stored in your music application. Both the PC and MAC have the feature that the last setting of the volume is restored when you use your CONCERO HP for a second or subsequent time. However, the very first time that you use the CONCERO HP, both Window’s and the MAC OS will initially set the volume to 0dB – ie to the maximum level. Take care therefore when first using the CONCERO HP that you have the headphones unplugged and set the volume to a lower level before listening. This initial volume level of 0dB may also apply if you use a different USB port for your CONCERO HP. Our engineers suggest that certain software music players may store a different volume level for each USB port.
CONCERO HP is designed to be the only audio device you need to take your library of digital music in whatever format you choose, to your high quality headphones. Laptop, CONCERO HP and quality headphones together make an outstanding audiophile system.
- Plug CONCERO into an active USB port and CONCERO enumerates as an audio output device. Now you can use CONCERO with your favorite music player on the MAC or PC, and experience a new level of audio clarity. CONCERO will optionally up-sample your digital 44.1kS/s and 48kS/s provided over the USB, into both an analog output from its internal ESS Sabre DAC’s into your existing audio pre-amplifier inputs or to your headphones. CONCERO (not the HP version) is also capable of generating a 24 bit ultra low jitter SPDIF stream output.
If you prefer to provide your own data at higher than 48kS/s, all CONCERO models will render it bit-perfect into the DAC (and SPDIF stream if not HP) while providing exceptional jitter removal.
- Plug CONCERO into a power-only USB port (of the type used to charge cell phones or similar), and finding no active host, CONCERO will configure to accept SPDIF input. Once again offering to up-sample 44.1kS/s and 48kS/s into high quality 176.4kS/s or 192kS/s, or render it bit-perfect and jitter reduced into to the internal Sabre DAC for your pre-amplifier inputs or headphones.
CONCERO models respond to the Apple IR Remote for you to conveniently control the USB host track selection and play/pause, and on-the-fly select the ideal internal filter to suite your taste. No glitch or artifact is generated during filter switching, allowing you to audit the filters and choose the optimum. Pressing the volume control knob on the HP model also cycles through the filter selections.
*The CONCERO HD and CONCERO HP do indeed use the 32bit ESS9018-2M Sabre DAC but the data you send to our DACs is at most a 24bit word. What then is the reason to mention that the DAC is 32 bits? It is important, and it sounds better when the DAC is 32 bits, because of the signal processing the DAC must do can end up loosing information (ie making a very low level of noise) if the internal bus width cannot accommodate a dynamic range higher than the dynamic range of the input data word.
Update June 2013: the latest software for CONCERO enables 384kS/s mode! If you purchased a CONCERO at any time you can now upgrade your unit to 384kS/s. Check out the Software Updates for CONCERO page. We now provide both a PC and a MAC version of the CONCERO updater. Please note that the 384kS/s is the new highest rate that the CONCERO can take from your USB source (352.8kS/s is the highest rate CONCERO HP and CONCERO HD can take), the internal filters still up-sample by a factor of four to the 176.4kS/s or 192kS/s rates.
Edited by OddJobs - 1/5/14 at 3:56pm