or Connect
Head-Fi.org › Forums › Equipment Forums › Portable Source Gear ›  DX90. 2X Sabre,1st page: Downloads, info&inst. . ! Lurker0 FW Mod link 1st page !!. .NEW FW! 2.3.0 . . . . .
New Posts  All Forums:Forum Nav:

DX90. 2X Sabre,1st page: Downloads, info&inst. . ! Lurker0 FW Mod link 1st page !!. .NEW FW! 2.3.0 . . . . . - Page 340

post #5086 of 13841
Quote:
Originally Posted by Mython View Post

Just for the benefit of others who may need this information, here is the solution mentioned above:


(from iBasso).

Please format the DX90 in FAT32 format.
The following is the batchtool, you can use it to fully format the DX90 and reload the firmware.
http://www.ibasso.com/download/DX90-tools.zip
 
I didnt add the instruction into it.  So, please refer to the instruction in the DX50's batch tool.
http://www.ibasso.com/download/RKbatchtool_for_DX50.zip
 
The following is the DX90's firmware.
http://www.ibasso.com/download/DX90V2.0.0Apr7th.zip
 
Sincerely
iBasso Audio
 


Hope this helps anyone who needs it, and thanks to pOOB73 and Samuel777 for relaying the information  beerchug.gif



This is only meant for device recovery in case the internal storage has accidentally been reformatted in the wrong format and can't be detected by your PC any more. It's not meant as a way to update your device as the process/USB drivers are somewhat flakey. I'm also not sure that this tool is meant to be public, as it's causing confusion and leads to problems if used incorrectly. The firmware linked is the one pre-installed on all DX90, so if your internal storage is fine, there' no need to reflash it.
Edited by pOOB73 - 5/16/14 at 8:20pm
post #5087 of 13841
@Kojaku kobiconn would be the best choice though, agree?
post #5088 of 13841
Quote:
Originally Posted by wickson View Post

@Kojaku kobiconn would be the best choice though, agree?

I think the 3.5mm trrs would be better?

post #5089 of 13841
Quote:
Originally Posted by wickson View Post

@Kojaku kobiconn would be the best choice though, agree?

It would be, but kobiconn jacks take up considerably more space than TRRS jacks. Plus there'd be less cutting involved with TRRS, because the ight jack could just be mounted externally or even replace the Coax/line-out.

Kojaku
post #5090 of 13841
Quote:
Originally Posted by tin427 View Post

I think the 3.5mm trrs would be better?

Quote:
Originally Posted by Kojaku View Post

It would be, but kobiconn jacks take up considerably more space than TRRS jacks. Plus there'd be less cutting involved with TRRS, because the ight jack could just be mounted externally or even replace the Coax/line-out.

Kojaku
Vinne responded and said he doesn't have the time frown.gif
post #5091 of 13841
Quote:
Originally Posted by wickson View Post


Vinne responded and said he doesn't have the time frown.gif

Wah wah.

Kojaku
post #5092 of 13841
Quote:
Originally Posted by Kojaku View Post


Wah wah.

Kojaku

I think there are some talented DIYers in China would do the job.

Let just sit there and wait.:wink:

post #5093 of 13841
Well...Vinnie just responded to me saying that he's busy and that he might be able to make the time, but he needs to know that at least 10 people would be interested in the mod so that demand could be justified.

Could OP please add a list of interest in DX90 Balanced mod? I need it to convince Vinnie.

Kojaku
post #5094 of 13841
Quote:
Originally Posted by Kojaku View Post

Well...Vinnie just responded to me saying that he's busy and that he might be able to make the time, but he needs to know that at least 10 people would be interested in the mod so that demand could be justified.

Could OP please add a list of interest in DX90 Balanced mod? I need it to convince Vinnie.

Kojaku

Add me one the list. I think most of the people on this thread would be more or less interested:wink:

post #5095 of 13841
Quote:
Originally Posted by Kojaku View Post

Well...Vinnie just responded to me saying that he's busy and that he might be able to make the time, but he needs to know that at least 10 people would be interested in the mod so that demand could be justified.

Could OP please add a list of interest in DX90 Balanced mod? I need it to convince Vinnie.

Kojaku

He just replied saying the same thing to me.

Add me to the list smily_headphones1.gif
post #5096 of 13841
Quote:
Originally Posted by pOOB73 View Post

This is only meant for device recovery in case the internal storage has accidentally been reformatted in the wrong format and can't be detected by your PC any more. It's not meant as a way to update your device as the process/USB drivers are somewhat flakey. I'm also not sure that this tool is meant to be public, as it's causing confusion and leads to problems if used incorrectly. The firmware linked is the one pre-installed on all DX90, so if your internal storage is fine, there' no need to reflash it.

Oh I feel like an idiot now lol.
Is version 2.0.0 the latest one? I can't find any firmware updates on ibasso so I just wanted to make sure.
post #5097 of 13841
The 3.5 mm TRRS connector seems to be a better choice, that would allow him to swap the SE version for this one. I am wondering how he'd wire the extra connections internally though. I would hope for a clean wiring job. Obviously, it would require circuit changes in order to achieve the 180 degree signal shift. Really wondering if he'd be able to cram that much more components in there. Sure enough even though we know Vinnie has the skills, I don't know if I'd venture a sample because if it does not work then what?
post #5098 of 13841
Quote:
Originally Posted by bobby12 View Post

Oh I feel like an idiot now lol.
Is version 2.0.0 the latest one? I can't find any firmware updates on ibasso so I just wanted to make sure.

Yes it is, no need for upgrade yet.
post #5099 of 13841
Quote:
Originally Posted by musicheaven View Post

Yes it is, no need for upgrade yet.

And if it is, there's a much easier way of updating your device. wink.gif
post #5100 of 13841
Quote:
Originally Posted by musicheaven View Post

The 3.5 mm TRRS connector seems to be a better choice, that would allow him to swap the SE version for this one. I am wondering how he'd wire the extra connections internally though. I would hope for a clean wiring job. Obviously, it would require circuit changes in order to achieve the 180 degree signal shift. Really wondering if he'd be able to cram that much more components in there. Sure enough even though we know Vinnie has the skills, I don't know if I'd venture a sample because if it does not work then what?
Nobody is asking you to sample, just for a commitment to mod once/if he is able to do it.... smily_headphones1.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Portable Source Gear
Head-Fi.org › Forums › Equipment Forums › Portable Source Gear ›  DX90. 2X Sabre,1st page: Downloads, info&inst. . ! Lurker0 FW Mod link 1st page !!. .NEW FW! 2.3.0 . . . . .