or Connect
Head-Fi.org › Forums › Help and Getting Started › Introductions, Help and Recommendations › I need foam tips for MEElectronics M6
New Posts  All Forums:Forum Nav:

I need foam tips for MEElectronics M6

post #1 of 6
Thread Starter 

Hi.

 

Someone can tell me a pair of foam tips that fit the MEElectronics M6? I know Comply Foam Tips 200 series would fit, but these tips are pretty expensive (15-20 US Dollar for three pairs). Thanks for your help

post #2 of 6
Thread Starter 

Bump

post #3 of 6
Here's a trick: On the Comply website there is a tool that tells you which tips will fit your IEMs. So, if you know that T200 will fit the M6, then look for all the other IEMs that also use the T200. Any tips that fit those other brands will probably also work with the M6. If you find a common big name brand (Ety, UE, Shure, Westone, Sony) that also takes the T200, then you are golden and it will be easier to find replacement tips. Also, try here: http://www.earplugstore.com/eaac.html
post #4 of 6
Thread Starter 

Yeah, thank you for your reply. I actually do that, but i find not much foam tips that fit for any headphone of the 200 series. Only One, this http://www.amazon.com/Shure-EAORF2-10M-Included-QuietSpot-Earphones/dp/B001LEH7LE/ref=sr_1_9?ie=UTF8&qid=1383094095&sr=8-9&keywords=shure+foam+tips  But are expensive too (Although less expensive than the comply).

post #5 of 6
Have you thought about trying to make your own? It's not hard - the toughest part is making a hole that is actually somewhat centered in the foam plugs. You might also need to trim the plugs a little to make them shorter. Once you have the plugs sized & holed, then just reuse the tubes from any old set of foams. Use a small drop of glue if you want to keep the tubes from working loose.

Here's another idea...

On my Mee M6, I wanted to use Complys, but I only have the smaller T100 that fit my Westones. So, I ripped the tubes out of the Complys I had, and just put them on the M6 without the tubes. It's not perfect, but it works. I imagine the same thing would work with other foam tips with tubes that are too small in diameter for the M6.
post #6 of 6
Thread Starter 
Quote:
Originally Posted by billybob_jcv View Post

Have you thought about trying to make your own? It's not hard - the toughest part is making a hole that is actually somewhat centered in the foam plugs. You might also need to trim the plugs a little to make them shorter. Once you have the plugs sized & holed, then just reuse the tubes from any old set of foams. Use a small drop of glue if you want to keep the tubes from working loose.

Here's another idea...

On my Mee M6, I wanted to use Complys, but I only have the smaller T100 that fit my Westones. So, I ripped the tubes out of the Complys I had, and just put them on the M6 without the tubes. It's not perfect, but it works. I imagine the same thing would work with other foam tips with tubes that are too small in diameter for the M6.

Thank you, like the idea of make my own foam tips but I have a question, If I don't have the tubes, Can I only make the hole in the foam smaller than normal and fit it in my iem? 

New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Help and Getting Started › Introductions, Help and Recommendations › I need foam tips for MEElectronics M6