Head-Fi.org › Forums › Head-Fi Special Forums › Premier Sponsor Forums and Sponsor Forums › Sponsor Forums › FiiO › Instructions regarding the installation of USB DAC driver!
New Posts  All Forums:Forum Nav:

Instructions regarding the installation of USB DAC driver! - Page 3

post #31 of 40
@bluenose63:
Thanks a lot, you're my saviour. I lost half a day trying to use this as a DAC. Then I stumbled upon your solution. So I registered right away just to give my feedback.
Like you I'm using Windows 8.1 Pro 64bit and just like you I had the same problem. The driver installation went fine after disabling the Driver Signature Verification but no sound.
Now I got it working thanks to your detailed post.
So it's a common issue I suppose.
post #32 of 40

what about getting the dad function to work on my mac? I am  confused how to do that..

 

thanks

Eric

post #33 of 40

I tried to disable driver signature verification....but my pc just shuts down automatically before i could choose the option ''7) Disable Driver Signature Verification''

 

anyone knows who to solve this?

post #34 of 40

To get to this option you have to click on enable restart or something like that.  My unit did not actually restart but then went to a menu where I could choose F7 or number 7.

 

There is a pretty good tutorial on this that somebody linked to earlier in this thread.

 

By following this step I was able to enable the X3 as a USB DAC for the PC.  Now I am just crossing my fingers that we can get a mode to reduce the power draw so it will work with IOS devices.

post #35 of 40
Quote:
Originally Posted by cn32dp View Post

I tried to disable driver signature verification....but my pc just shuts down automatically before i could choose the option ''7) Disable Driver Signature Verification''




anyone knows who to solve this?

https://www.youtube.com/watch?v=NM1MN8QZhnk
post #36 of 40

Fiio X3 firmware 1.x.x must update to firmware 2.0.5 first only can update to firmware 3.0, skipping firmware 2.0.5 Fiio X3 will not recognize/read the .fw file.

post #37 of 40

Всем привет! У меня такой вопрос. Я установил прошивку 3.0. Нужно ли устанавливать прошивку 2.05 для работы с ЦАП

Hello! I have a question. I installed the firmware 3.0. Do I need to install the firmware 2.05 to work with DAC

post #38 of 40

Я тут почитал темы. И как мне теперь установить прошивку 2.05 с функцией ЦАП, если я уже установил прошивку 3.0 на прошивку 1.0

post #39 of 40
Firmware 3.0 also having USB DAC, The upgrade only add function any function from previous version firmware stay remain unmoved.
post #40 of 40
I am on the beta 3 firmware. I could not get my asus to find the device this weekend. This used to work with the x3 set to dac mode. Fortunately the e07 was along.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: FiiO
Head-Fi.org › Forums › Head-Fi Special Forums › Premier Sponsor Forums and Sponsor Forums › Sponsor Forums › FiiO › Instructions regarding the installation of USB DAC driver!