Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › The iBasso DX50 Thread - Latest firmware: 1.5.0
New Posts  All Forums:Forum Nav:

The iBasso DX50 Thread - Latest firmware: 1.5.0 - Page 457

post #6841 of 14401
No noticeable difference in sound from 1.2.3b to 1.2.5 to my ears
post #6842 of 14401
Quote:
Originally Posted by kskwerl View Post

No noticeable difference in sound from 1.2.3b to 1.2.5 to my ears


Actually maybe a little less bass
post #6843 of 14401
Quote:
Originally Posted by ClieOS View Post
 

Did some basic measurements as promised, and here are the results: headphone-out output impedance is 0.7ohm, line-out output impedance is 124ohm. Low gain headphone-out max voltage 1.079Vrms, mid gain 1.75Vrms, high gain 2.655Vrms . Line-out FR cure is flat. Headphone-out FR curve has some minor bass roll-off due to output capacitors. With a 47ohm dummy load, it is -0.75dB @ 20Hz with corner frequency @ 8Hz. Output capacitance is estimated to be around 400uF. Purely on RMAA result, LO looks cleaner than HO (which is expected of course), though both don't measured quite as good as X3, especially on IMD. Since they are still well below the 1% threshold, it doesn't seem to be of any major concern. Output power is quite good, comparable to most standalone portable amps.

 

Just want to add that the above measurement is done under v1.2.2. I redo the RMAA measurement under v1.2.5 and the result is pretty much identical.

post #6844 of 14401

Thank you to all those who have tried 1.2.5.........I just never did well in the chemistry lab and prefer to wait with 1.2.2 that works flawless for me.  To Ibasso:  Please sirs, get it right!!  Thank You.

post #6845 of 14401

yep, they didn't fix the issue with multi disc albums :| they just got rid of numbering, that way it is less noticeable :D

post #6846 of 14401
Yes the 1.2.5 sound same as 1.2.3b diaappointing...
post #6847 of 14401

Firmware mirror is up: Http://www.sorensiim.dk/stuff/DX50Firmware_V1.2.5.zip :beerchug:

 

Edit: This appears to be a leaked beta, please grab the 1.2.5 final, link is in the FAQ. 


Edited by Sorensiim - 11/15/13 at 10:21am
post #6848 of 14401
Quote:
Originally Posted by nihontoman View Post
 

yep, they didn't fix the issue with multi disc albums :| they just got rid of numbering, that way it is less noticeable :D

What was the issues? I have a few multi disc albums and they work fine in sub folders lol

post #6849 of 14401
No. More highs than 1.2.2 but less than 1.2.3b.
Bass: more defined than 1.2.2, there is no more "boom boom effect".

And a question: it seems there is a little fade-in at each start of a song, so very often you cannot hear the first sound of a song. It is boring, and it seems Ibasso don't work on this. Is there a trick to correct this?

Seriously I have never seen before dx50 a dap player that is not able to play the first sound of a song!
post #6850 of 14401
Quote:
Originally Posted by Judge584 View Post

No. More highs than 1.2.2 but less than 1.2.3b.
Bass: more defined than 1.2.2, there is no more "boom boom effect".

And a question: it seems there is a little fade-in at each start of a song, so very often you cannot hear the first sound of a song. It is boring, and it seems Ibasso don't work on this. Is there a trick to correct this?

Seriously I have never seen before dx50 a dap player that is not able to play the first sound of a song!

 

Have you turned on gapless option?

 

SQ impressions seems to be very different. The only way is to start with 1.2.2, listen few songs, then update DX50 to 1.2.3, listen same songs and jump up to 1.2.5, and then repeat it few times :P Unless, someone have two DX50s ;)

 

I must wait few days to check it. I'm really curious about the SQ, I prefer 1.2.3 version.

post #6851 of 14401
Quote:
Originally Posted by Sorensiim View Post
 

Firmware mirror is up: Http://www.sorensiim.dk/stuff/DX50Firmware_V1.2.5.zip :beerchug:

For some reason I can never finish the download at the ibasso website. I always get a [failed - network error].

 

So thanks :)

post #6852 of 14401
Thread Starter 

Just updated to 1.2.5. I don't find much differences compared to 1.2.3beta, sound wise and behavior wise. Not a leap update compared to 1.2.2->1.2.3beta. I guess this is all good. After so many updates, this is the first time since a very early update that I did not have to go down to Recovery mode. I, again, left my microSD card in the reader and nothing happened to it, therefore folks it's safe to just leave it in there. I killed the scan before the factory reset, what's the point when you know it will have to be done again after the factory reset.

 

Enjoy my music as always. :ksc75smile:

 

I have to say the DX50 is truly a fun player to spend music time with.


Edited by musicheaven - 11/15/13 at 6:42am
post #6853 of 14401

is there release notes?

post #6854 of 14401
Quote:
Originally Posted by Sorensiim View Post
 

Firmware mirror is up: Http://www.sorensiim.dk/stuff/DX50Firmware_V1.2.5.zip :beerchug:

 

Just in time.  Downloading.   :cool:

 

Thanks!

post #6855 of 14401
Thread Starter 
Quote:
Originally Posted by Marleybob217 View Post
 

For some reason I can never finish the download at the ibasso website. I always get a [failed - network error].

 

So thanks :)

You must have some issues with your internet connections, maybe speed/reliability. I used iBasso site and no problems whatsoever.

 

Thanks @Sorensiim for your dedicated support.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Portable Source Gear
Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › The iBasso DX50 Thread - Latest firmware: 1.5.0