Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Knob gone completely lose on my B22, how do I fix it?
New Posts  All Forums:Forum Nav:

Knob gone completely lose on my B22, how do I fix it?

post #1 of 10
Thread Starter 

Hello guys, pretty much the title, does any of you familiar with this type of knob, how can it be fixed?

 


Edited by Pustik - 7/24/13 at 5:39pm
post #2 of 10

There is usually a set screw that you tighten and loosen with a hex key.

post #3 of 10
Thread Starter 

Where do i get it if i dont have the key? Also the hole is perfectly round.

post #4 of 10

You can usually find a selection of hex keys at the local

hardware store. Take the knob with you to check the size.

 

When the set screw it tightened, it will hold the knob

on the shaft firmly.

post #5 of 10
Thread Starter 

You think home depot would have it?
 

post #6 of 10

Yes, they probably would.

 

You can buy them singly or in sets.

 

Sometimes they are referred to as "Allen Keys".

post #7 of 10
Thread Starter 

I had those keys in my home all this time lol, but only after i saw that link i remembered, thank you!
 

post #8 of 10
Quote:
Originally Posted by Avro_Arrow View Post

Yes, they probably would.

 

You can buy them singly or in sets.

 

Sometimes they are referred to as "Allen Keys".

 

Or sometimes...    Allen's Keys.      wink.gif

post #9 of 10

If there is a setscrew on the side of the knob somewhere that's what you need. It may also just be glued on, in that case you'll need a good metal to metal adhesive, epoxy may work, I'd use a anaerobic metal adhesive from Loctite myself.

post #10 of 10
Thread Starter 
I did fix it with hex key, thanks for the input.
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Knob gone completely lose on my B22, how do I fix it?