Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › DX50 a new smaller DAP from iBasso. Spec. page 1. Impressions start on page. . .
New Posts  All Forums:Forum Nav:

DX50 a new smaller DAP from iBasso. Spec. page 1. Impressions start on page. . . - Page 32  

post #466 of 3609

Compatible up to 2TB?!?! devil_face.gif ZEUS!

post #467 of 3609
Personally would love to have seen 12V rather than 9V voltage swing on headphone amp (not much science logic behind my preference, more just observational experience from the VentureCraft DD std 9V vs LE 12V). At least in that implementation, sounded fuller and more robust.

Aside from that I hope iBasso will sell to Japan via their online store. I mailed them about the DX50 & they knew I was in Japan, I got a generic response of "Please contact Hibino" since they are the distributors of iBasso OEM.

Jamato8, if you do talk to them next could you please ask them to be generous to JP customers who are interested in buying online? Unless there's a HDP-R5 coming up that no one knows about.

Cheers!
post #468 of 3609

What does the 9v voltage swing say about the amp though? Can someone translate it to the more standard X mw into Y ohm?

post #469 of 3609
Quote:
Originally Posted by OddJobs View Post

from Ibasso web site.

DAMN! NEED TO BUY THIS NOW.

post #470 of 3609
Quote:
Originally Posted by AnakChan View Post  I mailed them about the DX50 & they knew I was in Japan, I got a generic response of "Please contact Hibino" since they are the distributors of iBasso OEM.

 

That happens all the time; sort of annoying.

post #471 of 3609
Thread Starter 
Quote:
Originally Posted by AnakChan View Post

Jamato8, if you do talk to them next could you please ask them to be generous to JP customers who are interested in buying online? Unless there's a HDP-R5 coming up that no one knows about.

Cheers!

I have sent an email asking. There are good sounding amps that run at 5 volts. I think 9 volts, done right, should sound fine, IMO, but I guess we will have to wait. 

post #472 of 3609
nice.

was hoping to see different dac though.
post #473 of 3609
Thread Starter 
Quote:
Originally Posted by charlie0904 View Post

nice.

was hoping to see different dac though.

What type or make?

post #474 of 3609

I really got to wake up. Either that or get more sleep because I completely missed it in the iBasso specs page, duhhhh.

 

WM8740 24 bit DAC chip <<<<<Does anyone here know anything about this DAC chip? Are we talking warm, neutral or analytical??? Anyone?


UPDATE:

 

Google can really be your friend. Taken from the Wolfson site

----------------------

Description

The WM8740 is a very high performance stereo DAC designed for audio applications such as CD, DVD, home theatre systems, set top boxes and digital TV. The WM8740 supports data input word lengths from 16 to 24-bits and sampling rates up to 192kHz. The WM8740 consists of a serial interface port, digital interpolation filter, multi-bit sigma delta modulator and stereo DAC in a small 28-pin SSOP package. The WM8740 also includes a digitally controllable mute and attenuator function on each channel.

The internal digital filter has two selectable roll-off characteristics. A sharp or slow roll-off can be selected dependent on application requirements. Additionally, the internal digital filter can be by-passed and the WM8740 used with an external digital filter.

The WM8740 supports two connection schemes for audio DAC control. The SPI-compatible serial control port provides access to a wide range of features including on-chip mute, attenuation and phase reversal. A hardware controllable interface is also available.

Features

  • 120dB SNR (’A’ weighted, mono @ 48kHz)
  • 117dB SNR (’A’ weighted, stereo @ 48kHz)
  • 104dB THD (’A’ weighted @ 48kHz)
  • Sampling frequency : 8kHz - 192kHz
  • Input data word : 16 to 24-bit
  • Selectable digital low pass filter
  • Optional interface to industry standard external filters
  • Hardware or 3-wire SPI control
  • Fully dfferential voltage outputs

Anyone here here have any experience with this chip?


Edited by DigitalFreak - 5/16/13 at 8:33pm
post #475 of 3609
Isn't it the same DAC as the AK100 & AK120 (but dual)?
post #476 of 3609
Quote:
Originally Posted by AnakChan View Post

Isn't it the same DAC as the AK100 & AK120 (but dual)?


Good question, no idea? Doesn't Fiio also use that chip? For whatever reason I remember that number chip from somewhere.

post #477 of 3609
Thread Starter 
Quote:
Originally Posted by AnakChan View Post

Isn't it the same DAC as the AK100 & AK120 (but dual)?


Yes, the same. It has been used in many dacs and some daps. Ibasso has used it for a couple of years. They are a good dac, slightly warm sounding but it is all about implementation. It is well detailed, not analytical but organic. Again, implementation. :^)

post #478 of 3609

UPDATE

 

Here we go, i knew I remembered that DAC chip from somewhere. Little Dot DAC's use that chip.

post #479 of 3609

this is one of the most popular dacs in market, especially in some advanced daps.

s:flo2 (or teclast 51) is using dual wolfson wm8740, just like iriver ak120.

fiio x3, ibasso dx50 and iriver ak100 are utilizing single wolfson wm8740.

post #480 of 3609

Anyone knows how the WM8740 compares to the WM8960 chip found in Cowon devices?

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Portable Source Gear
This thread is locked  
Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › DX50 a new smaller DAP from iBasso. Spec. page 1. Impressions start on page. . .