Head-Fi.org › Forums › Misc.-Category Forums › Video Games Discussion › Best gaming mice
New Posts  All Forums:Forum Nav:

Best gaming mice - Page 8

post #106 of 114
Quote:
Originally Posted by PraetorXyn View Post

Quote:
Originally Posted by GL1TCH3D View Post

The naos 3200 is optical unlike the 5200 and 8200 which were like you said laser mice

Also I'm wondering if the glass coating of the artizan shidenkai would affect optical mice


I have the g9x which has been my go to mouse

The rat7 was ergonomically my favorite but far too slow response time
I don't know if the naos 3200 is flawless or not sensor wise, few optical mice are.
If you like the G9X shape, but want a flawless sensor I have three recommendations:
1. Genius Maurus (Avago A3090, which the Logitech G400/G400s uses a modified version of, the Avago S3095))
2. Roccat Savu (Avago A3090) [Limitation: No DPI slider. You can only choose between 400, 800, 1600, and 4000). Very comfortable mouse with sandpaper-like thumb grip so it won't slip. One of the left thumb buttons is mapped to Shift+, and when you hold that button it makes all the other buttons on the mouse do something different. You can set all that up in the driver software, which is probably the best I've used.
3. Cooler Master Storm Spawn (Avago A3090) (Make sure to get the most recent firmware update, which fixes problems caused by earlier firmware updates)

There are other mice with the A3090 sensor, and that's not the only perfect sensor.
Some mice that have that sensor still won't be perfect though, it depends on if they have prediction enabled.

Here is a basic list of mice and their sensors, and whether they have prediction or not.
It's by no means complete, but should give you something to go on.
http://www.overclock.net/t/854100/gaming-mouse-sensor-list

I saw the savu but I usually play at about 2200 dpi +/- 200 depending on the game etc.
The spawn is my top choice at the moment.
Was hoping you'd be able to help me find out of the naos 3200 is flawless or not xD
Is the maurus limited to the 5 preset dpi settings?
post #107 of 114

I disagree with Savu being comfortable but that's for me, I used it only a day or two but that was enough to start feeling a tired wrist after a bit of use. I'm a fingertip user and the backside was too rectangular shaped I felt so the fingers couldn't rest comfortable at the backside of it (I grab the mouse at the back with the outer palm/fingers only). MX518 I could game with for say 5 hrs straight without any issues, the Savu I start feeling excessive stress at my wrist after an hour or so.


Edited by RPGWiZaRD - 11/9/13 at 12:33pm
post #108 of 114
Quote:
Originally Posted by GL1TCH3D View Post


I saw the savu but I usually play at about 2200 dpi +/- 200 depending on the game etc.
The spawn is my top choice at the moment.
Was hoping you'd be able to help me find out of the naos 3200 is flawless or not xD
Is the maurus limited to the 5 preset dpi settings?

The Naos 3200 has the Avago A3060 sensor which the Logitech MX518 had. The sensor doesn't have any acceleration, but it does have prediction, which means that it will try to interpolate your movements into the way the manufacturer thought it should be moved, typically in straight lines.

 

When you move a mouse without prediction from left to right, it will look something like this, assuming it was drawing a line with the cursor:

-_-_-_-_-_ except all the lines are connected by vertical lines to make a series of 'u' looking dips. Prediction tries to make it a straight line. It sounds like a good thing, but it really isn't.

 

I haven't personally used the Maurus, but I saw that it had a similar shape and had an Avago A3090 sensor so it should be flawless.

 

The thing is that at the high DPI you play it, you might not notice flaws anyway.

You need to have mouse acceleration turned off in Windows (it's called Enhanced Pointer Precision, ironically) and this can be done either in Control Panel or more simply in the driver programs for most mice. As long as your mouse doesn't have any built-in +/- acceleration, which all laser mice do but the ones I've mentioned and the Naos 3200 don't, you'll have a perfect 1:1 correspondance between the movement of the mouse and the movement of the cursor.

 

After that, the times when you'll really notice sensor flaws are generally at low to medium sensitivity (200-800 or so). The reason for that is that with 1600 DPI (the highest I've ever used), you can only barely move the mouse or the cursor will absolutely fly, so you're not moving it far enough for acceleration or prediction to really happen most of the time. You'd have to be hyper sensitive to notice unless you were getting mouse lag.

post #109 of 114
Quote:
Originally Posted by PraetorXyn View Post

Quote:
Originally Posted by GL1TCH3D View Post

I saw the savu but I usually play at about 2200 dpi +/- 200 depending on the game etc.

The spawn is my top choice at the moment.

Was hoping you'd be able to help me find out of the naos 3200 is flawless or not xD

Is the maurus limited to the 5 preset dpi settings?
The Naos 3200 has the Avago A3060 sensor which the Logitech MX518 had. The sensor doesn't have any acceleration, but it does have prediction, which means that it will try to interpolate your movements into the way the manufacturer thought it should be moved, typically in straight lines.

When you move a mouse without prediction from left to right, it will look something like this, assuming it was drawing a line with the cursor:
-_-_-_-_-_ except all the lines are connected by vertical lines to make a series of 'u' looking dips. Prediction tries to make it a straight line. It sounds like a good thing, but it really isn't.

I haven't personally used the Maurus, but I saw that it had a similar shape and had an Avago A3090 sensor so it should be flawless.

The thing is that at the high DPI you play it, you might not notice flaws anyway.
You need to have mouse acceleration turned off in Windows (it's called Enhanced Pointer Precision, ironically) and this can be done either in Control Panel or more simply in the driver programs for most mice. As long as your mouse doesn't have any built-in +/- acceleration, which all laser mice do but the ones I've mentioned and the Naos 3200 don't, you'll have a perfect 1:1 correspondance between the movement of the mouse and the movement of the cursor.

After that, the times when you'll really notice sensor flaws are generally at low to medium sensitivity (200-800 or so). The reason for that is that with 1600 DPI (the highest I've ever used), you can only barely move the mouse or the cursor will absolutely fly, so you're not moving it far enough for acceleration or prediction to really happen most of the time. You'd have to be hyper sensitive to notice unless you were getting mouse lag.
First thing I did was turn off the enhanced pointer when I reinstalled xD
I don't thing I'm sensitive enough to notice prediction
Thanks for the info
post #110 of 114

had the savu, bought the kone pure optical recently and i must say, its superb. build quality wise its probably one of the best I have seen or used.

post #111 of 114

Have had amazing luck with the Logi G400 and SS Sensei Raw, although the Sensei gets shelf-space since it doesn't play well with cloth pads which I prefer.

post #112 of 114
whats a good wireless claw-grip mouse that has at least 3 buttons and a rechargeable battery/dock thing? I liked how the old MX revolution used to have a cradle for when it wasnt in use, and even having 2 battery packs that you can keep swapping between is fine. I hate how my G700 stays wired or uses up 2 USB ports (one for transciever, one for charging chord).
post #113 of 114

Thought I would write in, I am still with my deathadder 2013, great improvelment over the copperhead couldn't be happier I just wish I had a better mouse mat / gel pad. I am using the razor gelbad from an old gaming mat I used and couple it with the EVGA gaming mat

 + 

post #114 of 114

Looking for a new mouse because my Sensei Raw is nearing the end of its lifespan. It has to be light and suited for a claw grip as I don't like unwieldy mice. It preferably should under 100g and have a perfect a sensor as possible. Here's my considerations so far:

 

  • Steelseries Kana V2
  • Zowie FK1
  • CM Storm Spawn
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Video Games Discussion
Head-Fi.org › Forums › Misc.-Category Forums › Video Games Discussion › Best gaming mice