Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Help with cmoybb rechargeable
New Posts  All Forums:Forum Nav:

Help with cmoybb rechargeable

post #1 of 3
Thread Starter 

Hey all,

 

First off, sorry if this is the wrong forum to ask this.  I just finished building a cmoybb v2.03 rechargeable from JDS labs and the right channel is very very distorted and quite a bit louder than the left.  The left sounds great, crystal clear and beautiful, the right sounds like a tasmanian devil giving birth to a wolverine.  I checked all of my solder and I don't see any bridges or dry pads and I'm not sure where to start looking.  I can discern the audio signal on the right side, it's there but it's like there is a veil of really really loud static in front of it.  The static seems to be adjusted with the volume pot, but it starts out several dB louder than the left channel.  Thanks in advance for any help you guys can give.

post #2 of 3

To help you really need some decent pictures of both sides of the board

 

cheers

post #3 of 3
Thread Starter 
Quote:
Originally Posted by Fred_fred2004 View Post

To help you really need some decent pictures of both sides of the board

 

cheers

Will do, leaving for a week here in a few so I'll have to do it when I get back.  Thanks!

New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Help with cmoybb rechargeable