Head-Fi.org › Forums › For Sale / Trade Forums › For Sale / Trade (and Feedback) Forums › Amplification For Sale / Trade › Peachtree Audio Decco2 + Vacuum tubes
New Posts  All Forums:Forum Nav:

For Sale: Peachtree Audio Decco2 + Vacuum tubes

post #1 of 4
Thread Starter 
This Classified is Closed

For Sale:
Peachtree Audio Decco2 + Vacuum tubes

Will Ship To: ConUS

 

Upgraded my audio system so I am selling my Peachtree Audio Decco 2 which has under 150 hours of use and was purchased 1 year ago from authorized dealer One Call.

It's an amazing sounding a all-in-one system with built in asynchronous Sabre ESS 9006 DAC, speaker amp w/ 40w per channel, pre-amp with subwoofer output, and headphone amp (upconverts audio signal to 192/24bit audio from digital sources USB/Optical). Note that there is a small patch in the rear of the unit that is "un-finished" (shown in the picture) I saw a model in a store that also had this problem, Peachtree said I could send it to be re-finished but I never went through the trouble since it would never be seen.

Also, the image shows speakers and a Denon headphone, those are not included in the sale, the sale is for: Decco2 + vacuum tubes.
 
The 6DJ8 tubes included are: 3 NOS Amperex, 2 NOS Bugle Boy, and 1 NOS RCA all tested excellent with Hickok 600A (picture attached). These tubes can be used with the Decco2 built in hybrid tube headphone amp and pre-amp. 
 


Decco2 Specifications:

Amp
40 watts per channel <1% distortion into 6 ohms
Stereo MOSFET amp modules

Preamp
Class A Preamp output stage
<30 Ohms output impedance 
Hybrid tube design using triode (Stereo 6N1P)
6.5V output @ 2.0V input
Polypropylene caps in the signal path
2 Aux input
3 Digital inputs (all transformer coupled)
USB, Toslink (optical), Coax

Headphone Amp 
Class A output with 6N1P tube in the circuit
Suitable for all electro-dynamic headphones
Frequency response: DC ~ 100 kHz +/- 0.1dB
Voltage gain: 10dB
Maximum output voltage: 7Vrms
Output impedance: <30ohms
Maximum output power: 600mW into 8 Ohm / 300mW into 150 Ohm / 150mW into 300 Ohm

Digital to Analog Converter (DAC)
4 digital inputs: 1 iPod, 1 USB, 1 Coax, 1 Toslink (optical) 
ESS 9006 Sabre DAC w/patented jitter reduction circuit 
24/96 upsampling 
11 regulated power supplies
Class A output stage (for use as an external DAC)
Transformer coupled digital Inputs for ground isolation
Galvanically isolated USB stage. 
>118db S/N 
<1 picosecond jitter measured at the Master Clock (Super Clock)

AC 115v/230v switchable from back panel

Size 5" H x 14 ¾" W x 14" D (including volume knob and speaker terminals)

Finish Black Gloss weight 25lb

 

*Please Add $50 for shipping and paypal fees unless you're local to Orange County (Southern California) and willing to pick up.


Edited by Ahzari - 3/20/13 at 10:34pm

Gear mentioned in this thread:

post #2 of 4
So both amp and preamp are tube?
post #3 of 4
Thread Starter 
Quote:
Originally Posted by BigCabDaddy View Post

So both amp and preamp are tube?

hybrid - correct.

post #4 of 4
Thread Starter 

sold!

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Amplification For Sale / Trade

Gear mentioned in this thread:

Head-Fi.org › Forums › For Sale / Trade Forums › For Sale / Trade (and Feedback) Forums › Amplification For Sale / Trade › Peachtree Audio Decco2 + Vacuum tubes