Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › I need screws for a SONY MDR CD3000
New Posts  All Forums:Forum Nav:

I need screws for a SONY MDR CD3000

post #1 of 7
Thread Starter 

Hello everyone,

 

does anybody know where I could find screws for the Sony MDR CD3000 ?

 

Thank you for your help.

Gear mentioned in this thread:

post #2 of 7
Thread Starter 

The headband assembly of the CD3000 has been replaced by someone who lost a screw when reassembling the headphone, and this screw is very unusual, I had never seen one like it.

I made some researches with Google and ebay, but it has been unsuccessful.

So I'd be glad if someone could help me.
 

post #3 of 7

if you can take a detailed picture of one it would be best, preferrably with thread pitch also. You'd get better results from all the DIY'ers that might have something that works.

post #4 of 7

The screws are easy to replace, almost all cheap small toys from your cheap Walmart use these kind of screws but in silver. That's what I did with my CD850 while ago, but I found black ones instead.

 

Looked at your location, don't know if France (Paris) have a Walmart but there should some cheap $2 bargain stores there that hold those cheap overseas made toys.


Edited by DefQon - 12/7/12 at 1:04am
post #5 of 7
Thread Starter 

Thanks for your advice.

Here are the pictures.

 

 

DSCN9159.JPG 820k .JPG file

 

DSCN9162.JPG 799k .JPG file
post #6 of 7

If Sony can't provide you with one I think you'll have to make one. Measure the length and determine the the thread size, 10/24, 8/32 whatever. get a washer that fits the screw and is the correct diameter, then find something like small clear plastic tubing or electricians tape wrapped very tightly for the collar. Think like McGyver.

 

Good luck.

post #7 of 7
Thread Starter 
Quote:
Originally Posted by fatcat28037 View Post

If Sony can't provide you with one I think you'll have to make one. Measure the length and determine the the thread size, 10/24, 8/32 whatever. get a washer that fits the screw and is the correct diameter, then find something like small clear plastic tubing or electricians tape wrapped very tightly for the collar. Think like McGyver.

 

Good luck.


OK, thanks. I'll try the McGyver method.  ;-)

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Headphones (full-size)

Gear mentioned in this thread:

Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › I need screws for a SONY MDR CD3000