The HeadAmp GS-X Thread - Page 5

Quote:

Originally Posted by justin w. 

response:

 

 

So measuring the impedance of the gsx is not going to be so easy, i need a booster

amplifier for the signal generator because the gsx tests so low. At full blast on the generator

which is 20 volts peak to peak...

 

Here are preliminary numbers. single ended. 

 

At 10x gain, at 1khz, the output impedance is between .2 and .3 ohms

at 10x gain at 20khz the output impedance is between .4 and .5 ohms

 

at 1x gain at 1khz, the output impedance is less than .1 ohm

at 1x gain at 20khz the output impedance is less than .2 ohms

 

I can't put enough voltage into the back end of the resistor to accurately measure

the signal at the output of the gsx.

 

Measuring balanced is also not going to be so easy, i may use an isolation transformer

for this, but it almost has to be double the impedance above.

Thanks, Kevin and Justin! The new GS-X sounds like a beast!

Can you confirm what transformers are going into this first run of the new GS-X?  I have conflicting values right now at 25VA and 35VA.

It is official, I am on-board for this batch of GS-X!

Quite exciting to be making my first HeadAmp purchase.

Quote:

Originally Posted by Solude 

Can you confirm what transformers are going into this first run of the new GS-X?  I have conflicting values right now at 25VA and 35VA.

What's the word on this?

Quote:

Originally Posted by justin w. 

 

they're 25VA per channel.  each channel uses about 10 watts

So are the 35VA going in the next run or something?

No mixed signal in numbers and timelines caused that mix up.  Old model, prototype transformers... 15VA, new model, production transformers 25VA.  Sorry for confusing people.

I changed my mind on colors, went from black/red led to silver/blue led.  Sticking with DACT.  The pictures of the silver faced BHSE's did me in considering the front panels are now coming polished.

I don't think either situation is a good idea.  You send out 25 boards with different LEDs and then ask for 19 DACT, 6 Alpha and expect the pots to come back on the right LEDs... not likely.

Will add, LED choice was never declared an option so... blue for everyone :p

Never liked silver, but that looks amazing.

Quote:

Originally Posted by Mr.Sneis 

I changed my mind on colors, went from black/red led to silver/blue led.  Sticking with DACT.  The pictures of the silver faced BHSE's did me in considering the front panels are now coming polished.

 

Has anyone been playing with opting for some of the more uncommon colors (other than black/silver)?

Although I don't see myself going for any of those options, it would be quite a treat to see some.

Similarly to what was just mentioned above, I have tried using some of the pictures from the BHSE thread to paint a picture in my mind.

Here are some of the pictures I enjoyed the most:

Blue anyone?