Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Dre Beats Studio DIY teardown and modify question...
New Posts  All Forums:Forum Nav:

Dre Beats Studio DIY teardown and modify question... - Page 6

post #76 of 82

they are different but i have a few of these demo models but have no battery compartment by friend has a proper set and prefer the demo ones

post #77 of 82
Quote:
Originally Posted by john1100 View Post
 

they are different but i have a few of these demo models but have no battery compartment by friend has a proper set and prefer the demo ones

If there isn't a compartment and the circuit runs off a different voltage than a li-ion, then it's probably not possible to install a battery and make it work.

post #78 of 82
Hey guys! I know this is not a very recent thread, And I also know that you guys were talking of something completely different to what I'm about to ask, but this is the only thread I've found so far about the disassebly of Beats Studio.
So I'll ask you guys anyway: has anyone of you guys tried to put the new cushions of the Beats Studio (2013 version) on the old version of the Studios? These new cushions are sooooo much comfortable compared to the old ones.
So I was wondering if they would fit in the old model! wink.gif
post #79 of 82
Quote:
Originally Posted by thedarkbutter View Post

Hey guys! I know this is not a very recent thread, And I also know that you guys were talking of something completely different to what I'm about to ask, but this is the only thread I've found so far about the disassebly of Beats Studio.
So I'll ask you guys anyway: has anyone of you guys tried to put the new cushions of the Beats Studio (2013 version) on the old version of the Studios? These new cushions are sooooo much comfortable compared to the old ones.
So I was wondering if they would fit in the old model! wink.gif

They don't fit. I've tried switching the cushions from the New Studios to the old Studios, and from the Executives to the New Studios (the Executives have even more comfortable cushions!), but none of them are interchangeable. As you can see, the old Studio's cushions were clipped on, while the New Studio's cushions are adhered on using a kind of double sided adhesive foam. Also, the long and short diameters are different; the old ones are longer and narrower than the New ones.

 

post #80 of 82
Quote:
Originally Posted by vantt1 View Post

They don't fit. I've tried switching the cushions from the New Studios to the old Studios, and from the Executives to the New Studios (the Executives have even more comfortable cushions!), but none of them are interchangeable. As you can see, the old Studio's cushions were clipped on, while the New Studio's cushions are adhered on using a kind of double sided adhesive foam. Also, the long and short diameters are different; the old ones are longer and narrower than the New ones.



Thank you very much for your detailed answer! wink.gif
What a shame! :|
post #81 of 82

I have the same problem. I'll try just about anything

post #82 of 82
Hey guys, for those of you who want to buy the beats studio demos you can get them on eBay ( they are a lot cheaper). Also for those of you who want to know what the voltage for the studio 2.0 is here ya go. It's 9v with 1.5 amps, and the adapter size is 1.5mm*3mm on the tip
Edited by evan2014 - 9/3/14 at 1:58pm
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Dre Beats Studio DIY teardown and modify question...