Which Comply tips did you use?
- 459 Posts. Joined 1/2011
- Location: Boca
- Select All Posts By This User
Which Comply tips did you use?
I own a Velodyne F1500R sub. The bass extension is endless, sounds super clean, and the impact is something that you can feel in your soul. Cant wait to get a pair of their freakin IEMs!
Cool, thanks for the tip suggestion.
A shameless plug: I have a brand new pair for sale that I got when they had a promo. Bought an extra pair for a gift to my wife but she prefers CX200 over these http://www.head-fi.org/t/599237/vpulse-from-velodyne-bnib
Thanks. I don't think the depth will be an issue for me as I need something deeper than usual.
I am going to pick one up and see.
Usually, I like deeper fitting tips, but, with the Vpulse, I seem to get the best sound (clear and awesome bass) with the Complies when I cut about 40% off. I still get a good seal and the nozzle is completely free.
I think ear canals differ quite a bit, so the full Comply might be best for you. Hope you get a great fit/seal!
Do you happen to have the Large Comply tips? If so, are the Large Comply tips wider, same or narrower than the included single flange large tips, when you look at them from the side? (the widest part of the tip)
I went to buy some and they had only medium tips but they were a bit narrower than the included large tips, and I need something same or wider than the include large tips.
I think mine must be the medium sized ones because they're smaller in diameter than the stock large single flange tips.
on Comply's website
they have S, M, and L sizes of the T-400, which fits the Vpulse. They list each size's diameter at the base:
Diameter at proximal end (end attaching to device):
Small: 10.67 mm ± 0.50 mm (0.420" ± 0.020")
Medium: 12.45 mm ± 0.50 mm (0.490" ± 0.020")
Large: 12.57 mm ± 0.50 mm (0.495" ± 0.020")
Materials: Polyurethane foam, thermoplastic elastomer (all RoHS compliant)
Inside Diameter of Core: Depends on earphone design. Several stock sizes available.
Thanks for that info.
The difference between medium and large is almost nothing (0.12mm is as thin as a strand of hair), and makes me wonder if Comply made a mistake in the numbers.
If that is indeed correct, Ts-400 or Tx-400 large would be a better pick for me.
(I just checked the Tx-400 spec and the difference between large and medium is 1.52mm so I sent an email to Compy to verify whether the T-400 spec is correct.)
In any case, is the difference between the Comply tips and the include tips quite significant as far as the sound quality goes (bass, mid and high)?
You're right. I didn't even notice the minute difference between the stated diameters of the medium and large T-400. I think you're right that they made a mistake.
Regarding the difference between Comply tips and the stock tips: For me, the difference is ENORMOUS. I can never get a decent seal with tips like the stock vpulse tips, so the sound is very tinny and distant. For me, using the vpulse with the stock tips is like listening to a pair of over the ear headphones with the earcups pulled two inches away out from your ears and head. With Comply tips, i get a good seal and then the vpulse bass comes out in it's magnificent glory. And the mids and highs are clear. The whole sound is awesome across the board. For me, if i used the vpulse with only the stock tips, i'd think they were horrible earphones with no bass.
My assumption was incorrect. The specs are indeed correct. T series grow in length so the large tips are almost identical to the mediums except much longer (deeper). Tx series, on the other hand, grow in girth hence the wide gap between the mediums and larges.