Head-Fi.org › Forums › Misc.-Category Forums › Members' Lounge (General Discussion) › 「Official」Asian Anime, Manga, and Music Lounge
New Posts  All Forums:Forum Nav:

「Official」Asian Anime, Manga, and Music Lounge - Page 2255

post #33811 of 125698
Quote:
Originally Posted by bowei006 View Post

I have kinda heard of them. Will check out, would be eaiser if you make a folder of like 5 top fav MP3's

HNNNG is the only way to describe it.

Most of us in this thread will admit..that we have cried watching Clannad
All I have is alac... Too lazy to convert it lol. And 5 songs is a lot to span 10 years. And also, the best masterings aren't always necessarily my favorite songs and vice versa.

And yes, I didn't actually cry, but I got so damn teary eyed so many times in clannad and AS!

Quote:
Originally Posted by EveTan View Post

Do any of you guys have impressions of Clannad + Clannad Afterstory. I put off that series for a long time since I knew I wasn't mature emotionally to watch it. Was wondering if it really is the masterpiece some people claim it to be.
I love kyoani and pretty much everything they do, so I'm a bit biased... But I absolutely loved it. After story has one of my few coveted "10" ratings on myanimelist, and for good reason. I doubt there are this many anime in the world that can go from crying from laughter to crying in sadness in less than 5 minutes.
post #33812 of 125698
Quote:
Originally Posted by jgray91 View Post


I suppose it would be. I mean if there's anybody that deserves demigod children it's men who have endured living with yandere. But my preference would still be pettanko tsundere (now I sound like the typical ronery otaku).

Haha, yeah. 

post #33813 of 125698

 

Damn From the New World's ED animation is glorious. 

 

Warning: EP2 Spoiler! (Click to show)

That foreshadowing at the end of the episode fark! Second week in a row they've thrown it in our faces though. Would be better if it were more subtle. 

 

BTOOM! Started of well until, "Hey its a bomb with a button and a timer! I CAN'T FIGURE OUT HOW IT WORKS! OMG"

post #33814 of 125698

https://www.dropbox.com/sh/2slj9nbf054yg6r/smyzNz3RMk

 

This is my planned ABX Box. It's kinda big for just an ABX Box, bot I had no other choice.

Holes are pretty big, but I can patch that up. Maybe cover it with aluminium or something.

The bottom Uno stacko with Lego boards can be removed

 

This is what I planned :

1. Middle switch as X-determinator

2. One of the other two is the AB/X or A/B switch (Give it a bit more confusion a bit)

3. The front 3.5 is out* (Though the switch is blocking the front and back holes. Only the side holes are usable)

4. The side 3.5s are the A/B in

5. Either the switches or the 3.5 in or out are moveable, to make it random

6. Longer than necessary wires will be used so that I can move the components

7. Covering the inside of the box with aluminium sheet so that the components can be hold firmly

 

So any comments and suggestions on better position for the switches and in and outs?

I can't find any better box for this though. So unless it's really crucial to use a different box, then I'll change it

post #33815 of 125698
Quote:
Originally Posted by mechgamer123 View Post


Nooooo! I can't be mainstream!
And I wouldn't want my waifu to be sad that she isn't my avatar again...

You can shop the Obob picture. That way it won't be that mainstream.

And besides, at the moment you're one of a very large group of people having an anime avatar. It's arguable that the Obob avatar is less mainstream, since the total number having one is smaller than the total number of people having an anime avatar.
Quote:
Originally Posted by jgray91 View Post

Waifu you say?


The crazies are the most fun.

Respectable choices for a waifu.

I'll just stick with Azunyan.
Quote:
Originally Posted by 00MusicLover00 View Post

Yuno was the reason I stopped watching mirai nikki.

It's the reason why I should have stopped watching it.

Imo she was a bad character in the anime. (bad as in 'of bad quality' not 'badass' or 'evil')
Quote:
Originally Posted by manveru View Post

Just finished Evangelion.

heke...

๏_๏

That takes me back.
EVA was the first anime I watched, pretty much. It's where it all started.
Quote:
Originally Posted by bowei006 View Post

*sigh*


Man... I've NEVER liked classical rock. But now... I think I may start liking it if they have good mastered songs.

Listening to Queen, Led Zeppelin, Ozzy, and Metallica with their remastered albums is just absolutely awesome. Holy spech tacular....shiz...


Listneing to Enter Sandman right now. NEver liked the song or their band....but man. The guitars on dem Shures are burning a hole through everything right now. I have th itch to turn this up to 11..but I wish to save my ears smily_headphones1.gif

Aww man, I remember why I love Shure again.

Bad example of classical rock. They suck.

Get some Beatles in there and report back. Nothing (except perhaps Fripp and Shiina) come even close to the musical genius of the Beatles.
Quote:
Originally Posted by EveTan View Post

Do any of you guys have impressions of Clannad + Clannad Afterstory. I put off that series for a long time since I knew I wasn't mature emotionally to watch it. Was wondering if it really is the masterpiece some people claim it to be.

You could argue that it's a pretty decent anime, yes.
Quote:
Originally Posted by graphidz View Post

@Boris
Since Rikkun isn't here, I'll ask you then
Rikkun numbered the DPDT switch, but I din't find any numbering (I'm a noob). Is it OK to just use either side???

EDIT :
But one of the switch,for the X-determinator, has 1 2 3 labeled on the side

Either side is fine. As long as the middle is the output of the switch. You should also be consistent in left and right channels.
Quote:
Originally Posted by graphidz View Post

So I should just follow the diagram Rikkun gave me and either way is fine? More specifically, if I use 1 2 as 6 5 respectively, it'll still be fine?

Yes.
Quote:
Originally Posted by graphidz View Post

https://www.dropbox.com/sh/2slj9nbf054yg6r/smyzNz3RMk

This is my planned ABX Box. It's kinda big for just an ABX Box, bot I had no other choice.
Holes are pretty big, but I can patch that up. Maybe cover it with aluminium or something.
The bottom Uno stacko with Lego boards can be removed

This is what I planned :
1. Middle switch as X-determinator
2. One of the other two is the AB/X or A/B switch (Give it a bit more confusion a bit)
3. The front 3.5 is out* (Though the switch is blocking the front and back holes. Only the side holes are usable)
4. The side 3.5s are the A/B in
5. Either the switches or the 3.5 in or out are moveable, to make it random
6. Longer than necessary wires will be used so that I can move the components
7. Covering the inside of the box with aluminium sheet so that the components can be hold firmly

So any comments and suggestions on better position for the switches and in and outs?
I can't find any better box for this though. So unless it's really crucial to use a different box, then I'll change it

That box is pretty awesome.
The box doesn't really matter. As long as you have some way to hide the X-determinator switch, so that you can't cheat.

What you're doing now seems fine. Though step 7. should be unecessary. You can just screw the jacks and switches in tightly. Or at least, that should be the case normally.
post #33816 of 125698

YES! Finished KnK, twas an awesome experience.biggrin.gif

 

Now it's time for hyouka.

post #33817 of 125698
Quote:
Originally Posted by 00MusicLover00 View Post

YES! Finished KnK, twas an awesome experience.biggrin.gif

Now it's time for hyouka.

KnK?
post #33818 of 125698
at igromir. Info overload of everything the noise is so loud so flashy so bright i don't know where I'm going aaaaaaaaaaaaaaa

Currently I'm getting lunch.
post #33819 of 125698
Quote:
Originally Posted by Tilpo View Post

Either side is fine. As long as the middle is the output of the switch. You should also be consistent in left and right channels.

That box is pretty awesome.
The box doesn't really matter. As long as you have some way to hide the X-determinator switch, so that you can't cheat.
What you're doing now seems fine. Though step 7. should be unecessary. You can just screw the jacks and switches in tightly. Or at least, that should be the case normally.

 

OK

 

Though I had determined that The one different switch is the X-Determinator because well, it's the answer to the solution : "What is X" right?

 

Oh no, the holes are a bit big that the screws are halfway in. It can still hold on, but it moves like crazy

 

Quote:
Originally Posted by Tilpo View Post


KnK?

 

Kara no Kyoukai

post #33820 of 125698
Quote:
Originally Posted by Tilpo View Post


KnK?

Kara no kyoukai.

post #33821 of 125698

Just finished programming the source code for project-H's controller!

Though I can't test it out until I have the components....

 

Source Code (Click to show)

 

org 0033H
 
init:   
mov TCON,#00H
mov TMOD,#00000001b
mov R5,#00H
mov R6,#00H
mov P1,#00H
mov P3,#0FFH
 
power:
jb P3.3,power
acall t100
jb P3.3,power
power_0:
jnb P3.3,power_0
setb P1.5
acall t1000
setb P1.2
button:
jnb P3.3,poff
jnb P3.4,io
jnb P3.5,gain
sjmp button
 
poff:
acall t100
jb P3.3,button
poff_0:
jnb P3.3,poff_0
clr P1.2
acall t100
clr P1.5
sjmp power
 
io:
acall t100
jb P3.4,button
io_0:
jnb P3.4,io_0
cpl P1.4
sjmp button
 
gain:
acall t100
jb P3.5,button
gain_0:
jnb P3.5,gain_0
cpl P1.3
sjmp button
 
 
t100:
mov R7,#00H
t100_0:
mov TL0,#00H
mov TH0,#00H   
setb TR0
t100_1:
mov R5,TH0
mov R6,TL0 
cjne R5,#11000011b,t100_1
cjne R6,#01010000b,t100_1
clr TR0
inc R7
cjne R7,#4,t100_0
ret
 
t1000:
mov R7,#00H
t1000_0:
mov TL0,#00H
mov TH0,#00H   
setb TR0
t1000_1:
mov R5,TH0
mov R6,TL0 
cjne R5,#11000011b,t100_1
cjne R6,#01010000b,t100_1
clr TR0
inc R7
cjne R7,#40,t100_0
ret
 
end

 


Edited by b1o2r3i4s5 - 10/6/12 at 4:23am
post #33822 of 125698

83 more posts until fake HS. biggrin.gif

post #33823 of 125698

@ Project-H

I WILL BE ORDERING THE COMPONENTS NOW.

ARE WE SETTLED ON USING OPA2134?

post #33824 of 125698
Thread Starter 
Quote:
Originally Posted by bowei006 View Post

@Haiburi

You can't come over tomorrow, sorry man, 

 

Then quickly chuck some of that money at Borisu and speed this mess up.

Quote:
Originally Posted by bowei006 View Post

@Haiburi

You can come over tomorrown:)

Come on, make up your mind. In other news, I can't. PIANO STILL SUCKS EVEN THOUGH I LIKE PLAYING IT.

 

I still don't have a PayPal. I'm going to go ask my mother if all of my money's in the CD still because IIRC the CD isn't going to release my money until November, unless she went with the 2 year CD which means I WON'T BE ABLE TO ACCESS MY $1000 UNTIL NEXT YEAR. *cries*

 

But I'll see which one it is. She usually goes with the one year CD...the interest rates were crappy this year, and the last few years too.

Quote:
Originally Posted by 00MusicLover00 View Post

Yeah, but taiga has a wooden sword. XD

Haha!

Quote:
Originally Posted by manveru View Post

 

http://www.urbandictionary.com/define.php?term=Heke&defid=3916176

 

I liked it, but I'm not sure I completely understand it right now. I'm still trying to think about what the point was. Not in the sense that I think it was pointless, but in the sense that I'm digesting it still, so to speak. I guess this is one of those types of shows where it seems like it has a plot which is progressing towards something (Angels and all that stuff), but then at the end it turns out that none of that was the point at all? The show Lost was the same way. A bunch of unanswered questions and no plot resolution, but a definite emotional resolution. Not necessarily a bad thing at all, it just depends on what your expectations of the show are going in. I had no expectations when I started so it didn't put me off, but I wasn't expecting it to go in the direction that it did in the end.

Hm...I feel like I've heard the use "Heke" a lot in some anime...

Quote:
Originally Posted by bowei006 View Post

 

I don't really care but hopefully..that doesn't happen as I am sick of it.

 

 

 

 

 

 

 

 

@Borisu 

ohayou

I want to do that but I'm not going to void any warranties...yet.

Quote:

Originally Posted by b1o2r3i4s5 View Post

 

@haiby

what CAD software are you using?

I wouldn't really call Google SketchUp CAD software...same with Blender (which I still need to get used to using.

Quote:
Originally Posted by bowei006 View Post

Oyasumi Miina

 

I was recommended to read a romance manga and anime kimi no todoke tomorrow by people in the other anime thread on OCN. Our sub group thread(same name, started by Haiburi, and same first page) recommended me on it

 

They are some of the most dedicated talk...honestly. Its like diary thread length posts but on anime..24/7

http://www.overclock.net/t/1133032/asian-anime-manga-and-music-lounge

 

You get the longer posts after we learn what we each like and are like and stuff. 

OP isn't exactly the same.

 

I think I'm going to add a VN section...unless I already did. I forgot.

Quote:
Originally Posted by b1o2r3i4s5 View Post

@ Project-H

I WILL BE ORDERING THE COMPONENTS NOW.

ARE WE SETTLED ON USING OPA2134?

Hm? For what? (Sorry, wasn't paying attention)

post #33825 of 125698
Quote:
I wouldn't really call Google SketchUp CAD software...same with Blender (which I still need to get used to using.

What 3D file format can it import?

 

 

Quote:
Hm? For what? (Sorry, wasn't paying attention)

For the Obj2 in project-h (gain stage)

New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › Members' Lounge (General Discussion) › 「Official」Asian Anime, Manga, and Music Lounge