Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Broke prong on favorite cans, DIY fix easy?
New Posts  All Forums:Forum Nav:

Broke prong on favorite cans, DIY fix easy?

post #1 of 3
9/25/11 at 7:05pm
Thread Starter 

I like my BeyerDynamic DT 770 for their long listening session comfort, but today I spaced out listening and jumped across room to grab phone and the prong that goes in the sound card snapped in half. It's now only playing Mono. Is this any easy fix for someone with no experience, or can someone point me in the right direction of a place that will fix these? Thanks

Reply
post #2 of 3
9/25/11 at 8:30pm

Can you be a bit more specific?  Is it the plug that broke?  If so, thats an easy fix if you can get the broken end of the plug out of your female plug in which your headphones were plugged in at the time.

 

Solder on a new plug is the easiest DIY you can do...

Reply
post #3 of 3
9/25/11 at 11:50pm

If you can figure out which wires are which, this could be a good excuse to solder on a good Neutrik or Switchcraft plug (I have found Switchcraft easier to solder because it is larger, YMMV).

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Broke prong on favorite cans, DIY fix easy?