Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › Vinegar isn't working D:
New Posts  All Forums:Forum Nav:

Vinegar isn't working D:

post #1 of 18
Thread Starter 

So I bought some Denon D5000s 2 days ago from a head-fier. They are extremely good except for the fact the previous owner smokes, so the headphones smell of smoke. I don't mind too much, but I'd like to try and get rid of the smell. So far the only method I have tried is vinegar. I put the headphones in a box with a cup of vinegar next to them for 24 hours. It didn't really make a difference. So next I used a plastic bag so and tightened it a lot so there was no room at all. Just took them out after 24 hours and there's only a small difference in the smell.

 

Am I using the wrong vinegar? The only one the store had was extremely cheap malt vinegar. Do I need white vinegar? That's what most people talk about.

 

Is it better to put them in an extremely enclosed place with the vinegar, or loose in a box?

 

Cheers


Edited by Scottyyy - 8/7/11 at 5:32am

Gear mentioned in this thread:

post #2 of 18

Baking soda? I use that to get the smell of leftovers out of my fridge and I have a pretty neutral smelling fridge lol

post #3 of 18
Quote:
Originally Posted by Chris_Himself View Post

Baking soda? I use that to get the smell of leftovers out of my fridge and I have a pretty neutral smelling fridge lol


+1

Baking soda works smell removing miracles.

post #4 of 18
Thread Starter 

Alright, I'll go down to the store and get some baking soda. What's the best way to use it to get rid of smells?

post #5 of 18
Quote:
Originally Posted by Scottyyy View Post

Alright, I'll go down to the store and get some baking soda. What's the best way to use it to get rid of smells?


Open the box (you won't need the whole thing- maybe save some) and stick it in a confined area with the item.

 

post #6 of 18
Thread Starter 

Cool. I'll try instead of vinegar.

post #7 of 18
Quote:
Originally Posted by Scottyyy View Post

Alright, I'll go down to the store and get some baking soda. What's the best way to use it to get rid of smells?



You find an enclosed space,

 

...and then you build this little guy in it and have a bunch of fun :)

http://chemistry.about.com/cs/howtos/ht/buildavolcano.htm

post #8 of 18

If the baking soda doesn't work, try spraying them down with Fabreze.  Here in the U.S., it's product that is great a neutralizing odors.  If you can't find it, you might want to check out a hardware store that sells something like DampRid.  It's a product available in quite a few places - even Amazon.  It's supposed to be pretty good at absorbing odors.

 

http://www.damprid.com/odor-eliminator/odor-materials

 

Personally, as a practice, I don't buy items that have come from a smoker.  It's just not pleasant for me.

post #9 of 18
Run a few searches to see if there is an ozone chamber nearby. They are more common than most think.

Ozone chambers are used to remove the smell of smoke from furniture, etc. after a fire. Prices aren't too bad, either, if you have a small item.
post #10 of 18
Thread Starter 

I've heard that can damage the headphones though. Is that true?

post #11 of 18
Quote:
Originally Posted by Uncle Erik View Post

Run a few searches to see if there is an ozone chamber nearby. They are more common than most think.

Ozone chambers are used to remove the smell of smoke from furniture, etc. after a fire. Prices aren't too bad, either, if you have a small item.


I've also heard that's what they do with vehicles that have belonged to smokers, too.  It apparently does a pretty good job at removing all the smoke smell.
 

 

post #12 of 18

If I remeber correctly it eats/degrades certain plastics ( at what point though ?), not sure what those drivers are made of. I'm sure short term exposure shouldn't cause problems but don't quote me on it.

 

I'd be curious to find out what works as well: I ordered a vintage Audition brand set that even after a wipedown with windex and alcohol still have a lingering smoke stink. I smoke from time to time but never inside. Wouldn't you have to remove the actual residue? I heard vinegar does help to wipe it off. What about oxyclean? I wonder if that would ruin the finish on them though

I'll try some things too if I get to it and check back in.

 

I'll also put them directly in front of my heavenfresh ionizer on high see what happens. Doing that right now.

These are way too cheap to play around with an ozone chamber :) unlike yours

 

 

 


Edited by nick n - 8/9/11 at 6:17am
post #13 of 18
Quote:
Originally Posted by Uncle Erik View Post

Run a few searches to see if there is an ozone chamber nearby. They are more common than most think.

Ozone chambers are used to remove the smell of smoke from furniture, etc. after a fire. Prices aren't too bad, either, if you have a small item.


I had never even heard of an ozone chamber before.  Thanks for mentioning it.

post #14 of 18

Well it is really a simple solution.

 

 

Take off the pads.Being that there is really only the headband that is able to contain some smell. Treat the headband with a water based fabric smell remover then replace your pads with Denon or some after markets.Be very careful not to get the fabric smell reducer on the drivers. I think 90% of your smell is from the ear pads!

 

 

Let us know how it works out. 

post #15 of 18
Thread Starter 

The earpads and headband smell exactly the same actually. :p

 

The slow is slowly going away anyway. Or maybe I'm just getting used to it. I can now only smell them when I actually try, I can't smell the smoke when I'm just wearing them. A few more hours next to baking soda/vinegar and they should be fine.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Headphones (full-size)

Gear mentioned in this thread:

Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › Vinegar isn't working D: