Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Help with power supply for a newly built cmoy headphone amp with split rail.
New Posts  All Forums:Forum Nav:

Help with power supply for a newly built cmoy headphone amp with split rail. - Page 2

post #16 of 17
6/23/11 at 3:16pm
Thread Starter 
Quote:
Originally Posted by TheLaw View Post

Could be. You can look where the traces go and then look at the datasheet for the op-amp you are using to see which are the supply pins and see if you have it hooked up right. It's fairly easy to kill an op-amp so just make sure you've got that right.

 

I'm certain it is now. Look at this photo http://i.imgur.com/M9tJE.jpg

Can clearly see the ground traces(pink) going to the top and bottom (respectively) of the power poles(green).

 

EDIT: I see you've edited your post as well. Thanks again for the help, your time and knowledge is appreciated.
 

 


Edited by Ubel - 6/23/11 at 3:20pm
Reply
post #17 of 17
6/23/11 at 3:20pm

Okay you're good to go then. Have fun. =p

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Help with power supply for a newly built cmoy headphone amp with split rail.