Head-Fi.org › Forums › Equipment Forums › Dedicated Source Components › ACSS possible for Audio GD Dacs where you replaced the ACSS outputs for an extra set of RCAs?
New Posts  All Forums:Forum Nav:

ACSS possible for Audio GD Dacs where you replaced the ACSS outputs for an extra set of RCAs?

post #1 of 3
4/20/11 at 10:27am
Thread Starter 

Searching I read something about it being possible to run adapter cables but can´t find it again now.

Have a DAC19 DSP with an extra set of RCA outputs in place of the ACSS. Emailed Edwin but the language barrier hit me. Maybe someone here knows if it´s possible or what operations would be required to enable ACSS on it again?

Reply
post #2 of 3
4/20/11 at 10:46am

I would assume you would need to wire as shown in this picture...ask Edwin or Kingwa first to determine if any of the other required components are missing and if this is the only thing involved. I'm assuming your RCA's are just paralleled as the even on my DAC19-DSP the RCA/ACSS switch doesn't remove the RCA's from the circuit.

 

http://www.audio-gd.com/Pro/dac/DAC19/DAC194.jpg

 

You don't need ACSS connectors unless you want to use Audio GD cables...of course ACSS only works with Audio GD amps/pre-amps that have an ACSS input.

 

By no means sure if this will work but might help you when you're speaking with Audio GD.

 

 

 


Edited by Tom W - 4/20/11 at 10:52am
Reply
post #3 of 3
4/20/11 at 11:07am
Thread Starter 

Thanks. I would just need someone to solder the cable to the cast instead of rca spots it appears? They are now soldered to the same rca output instead of the cast so appears to be a simple task for those that know how to solder.. I do have the Ref9 so doubt it would be worse the hassle though. Anybody running ACSS DAC19 or the newer NB series versus the higher end Reference Audio GD dacs?

Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Dedicated Source Components
Head-Fi.org › Forums › Equipment Forums › Dedicated Source Components › ACSS possible for Audio GD Dacs where you replaced the ACSS outputs for an extra set of RCAs?