Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Build Mini^3 and Pimeta fresh PCB - Need help !!
New Posts  All Forums:Forum Nav:

Build Mini^3 and Pimeta fresh PCB - Need help !!

post #1 of 2
4/14/11 at 10:25am
Thread Starter 

Hi all,

 

I am newbie. I don't have any knowledge on electrical, but I am really want to build my own headamp. For see that Pimeta v2 and mini^3 v2 are the easiest ones to start.

But I facing the first challenge, that is PCB. I want make my own PCB, but I don't know how to re-design the board with software (like Orcad, Protel, Proteus, Altium, Cad-Cam), So I can not have the designed board to print out and make the board.

 

So I really need your help here. Could you pls send me the design of these headamp which can be printed to make the fresh PCB?

 

Many thanks!

Reply
post #2 of 2
4/14/11 at 2:46pm

I think that if you want to etch your own boards you should start

out with a much less complex design than the Mini^3 or Pimetea V2.

 

There are a couple of threads here dedicated to producing your

own boards and Tangent has a nice tutorial on how to use Eagle software.

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Build Mini^3 and Pimeta fresh PCB - Need help !!