Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › How do you bundle/pack your portable (pics welcome)
New Posts  All Forums:Forum Nav:

How do you bundle/pack your portable (pics welcome)

Poll Results: What do you bundle with?

Poll expired: May 5, 2012  
  • 57% (8)
    Rubber bands (like ALO or sports bracelets)
  • 35% (5)
    Velcro pad/strip
  • 0% (0)
    Custom case
  • 7% (1)
    Other
14 Total Votes  
post #1 of 13
4/1/11 at 12:10pm
Thread Starter 

The "pics of your portable rig" thread is great. I've gone through all of the pages (probably twice) but there aren't a lot of pictures of how people store their rig while on the go. What I want to know (or see) is are these two things:

 

1. How you attach/stack/velcro/etc. your gear together. I have and iPod and small amp I normally put in a pocket.

 

2. Are you using a fancy bag? Fanny-pack anyone?  

Reply
post #2 of 13
4/1/11 at 4:09pm

Back when my Classic and Cmoy worked (neither do now) I had them strapped together with an old Pepsi challenge wristband.

Reply
post #3 of 13
4/1/11 at 5:00pm

 

 

e359eb77.jpg?t=1301702269hippo ampsack

 

 

 

 

 

Reply
post #4 of 13
4/1/11 at 5:03pm

and velcro band lol1-2.jpg?t=1301702573

 

 

 

Reply
post #5 of 13
4/1/11 at 8:25pm
Thread Starter 

I like the amp sack. The name has a nice ring to it too. haha

Reply
post #6 of 13
4/1/11 at 10:50pm

I just use silcone bands for my Arrow + iPod combo (http://goodsforgiving.com/wristbands.html has a good selection since I didn't really like the ALO bands).


 

Reply
post #7 of 13
4/2/11 at 9:44am

Small velcro strips between my Fuze and T4 amp, then both into an old pleather camera case, with HF5 phones is a little pouch of their own.

 

 

Reply
post #8 of 13
4/2/11 at 10:46am
Thread Starter 

 Wow that's almost the exact setup I'll have (T4 + HF5). How to the HF5s sound out of the T4? (especially the low end)

Reply
post #9 of 13
4/2/11 at 11:42am

I use a touch, had an arrow, traded it for a Leckerton UHA-4.  I secure both to the touch with thin (1/32" or 1/16") plumbing o-rings of appropriate size.  They are thin, and can be rolled down to the bottom and up to the top of the screen, and still hold the amp to the touch, and leave the screen free for viewing and control.  Probably $1 worth of o-rings.  I am looking around for the right case to keep it all in.

Reply
post #10 of 13
4/2/11 at 11:51pm
Quote:
Originally Posted by Racer24 View Post

I like the amp sack. The name has a nice ring to it too. haha



yes the name is crazy LOL

Reply
post #11 of 13
4/4/11 at 9:12pm

Velcro strips between my iRiver H120 and iBasso D10, then both put into the ThinkTankPhoto All The Other Stuffs pouch.

Reply
post #12 of 13
4/5/11 at 5:01am

I'm using a clip + and a fiio E7

 

found that the samsung wave S8500 leather case fits the E7 beautifully!!! just had to trim the top for the IC and cut two slits to hold the clip on, and one hole for the 3.5mm

 

Photo0200i.jpg

 

Sorry about quality - phone camera is as good as it gets :/

 

Photo0202i.jpg

Reply
post #13 of 13
4/11/11 at 4:56pm

Doubled sided car foam tape + velcro = amazing combo since you can take out the foam tape without leaving residual if needed.

 

b5a82638_IMG_3594.jpg

 

930a5a43_IMG_3596.jpg

 

97a9a491_IMG_3597.jpg

 

And the PX200ii bag that was trimmed and sewed again to make it a perfect fit with the PAV2V+Touch.

Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Portable Source Gear
Head-Fi.org › Forums › Equipment Forums › Portable Source Gear › How do you bundle/pack your portable (pics welcome)