Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Expert: correct this eagle file for pcb plz
New Posts  All Forums:Forum Nav:

Expert: correct this eagle file for pcb plz

post #1 of 11
3/8/11 at 6:33am
Thread Starter 

hi

 

 this is my frist design in eagle and i want to know if it is correct or not

this circuit is design for stepper motor that supply with 5 volte and the l6203 supply with 24v 4A

and i want to know if it good design for brd or not as its my frist time to make pcb and scare sp much from that

as i am new user it is not illegale to attach file so i upload them on mediafire

 

plz if there r any mistake correct it and send me the correcting file thx

 

 

http://www.mediafire.com/?cmkxzwnz87rjtp6

Reply
post #2 of 11
3/8/11 at 7:26am

Is there any reason you started a second thread on this?

Reply
post #3 of 11
3/8/11 at 4:36pm
Thread Starter 

i am so sorry i dont know why ?

but i am not do that

sorry agian

plz see my eagle

Reply
post #4 of 11
3/8/11 at 4:43pm

Here is the board he is talking about...

 

First Try Board.png

Reply
post #5 of 11
3/8/11 at 4:49pm

Two things I noticed right away...

 

No board dimensions.

Trace that are not at 0, 45 or 90 degrees.

Odd angles are a no-no.

Reply
post #6 of 11
3/9/11 at 9:03am
Thread Starter 

thx for respond i dont know how to correct it.

plz tell how or send me correct file which u correct the mistake.

dimintion i cant calc it how to do that and i cant too to out put theis track to print it on pcb.

Reply
post #7 of 11
3/9/11 at 10:16am

Take a look at Tangent's video tutorials on using Eagle:

 

http://www.tangentsoft.net/elec/movies/

Reply
post #8 of 11
3/11/11 at 6:39am
Thread Starter 

THX SO MUCH BUT I AMSTILL DONT KNOW HOW TO OUTPUT THE PDF FILE TO MAKE PCB

AND HOW TO DIMINTION THE BOARD

I THINK THAT THE SOFTWARE DIMINTION IT AUTOMATIC

AS I CANT CALC HOW THE BOARD DIMINTION IS??

I SOLE SOME PROBLEM

CAN PLZ HELP ME AND SEND ME PDF

THE DIMINTION OF THE DRILLER IS 1MM

I WANT TO FILL VACCUM OF VIA AND ..

I CANT TO MAKE THAT

http://www.mediafire.com/?dhkymzz38qfl4js

Reply
post #9 of 11
3/11/11 at 10:11am

Take a look at http://www.sparkfun.com/tutorials/109

 

The border is in layer 20, dimension and should have had something put in automatically (default) when you generated the board from the schematic.

 

Are you trying to use this to etch your own board, or are you planning on having it commercially made? For boards I make myself, I usually export (File menu) an image of the board top side and bottom side.

 

 


Edited by Pars - 3/11/11 at 10:15am
Reply
post #10 of 11
3/11/11 at 12:11pm

Myself, I just print them directly on transparency film with the File>Print command.

Reply
post #11 of 11
3/13/11 at 8:04am
Thread Starter 

thx so much for all

\i print it and it work

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Expert: correct this eagle file for pcb plz