Head-Fi.org › Forums › Equipment Forums › Headphone Amps (full-size) › Calling All "Vintage" Integrated/Receiver Owners
New Posts  All Forums:Forum Nav:

Calling All "Vintage" Integrated/Receiver Owners - Page 925

post #13861 of 13872

We gave our daughter our old Pioneer SX 750.  She set it up with her TV...house already wired so she just had to plug it in.  She is trying to figure out if there is a way to hook up a remote control.  Anyone know if this is possible?

post #13862 of 13872

See if the TV has a setting for variable line level output.  With that the volume goes up and down with the TV remote instead of being constant full blast line level output.

Otherwise, you are buying a separate line level attenuation box with a remote.

I'm assuming you are running an RCA cord from an output on the back of the TV to an aux input on the SX-750.

 

Coming up on 48 hours of burn-in on my Marantz 1060, getting better and better.

post #13863 of 13872
Quote:
Originally Posted by photo1257 View Post

We gave our daughter our old Pioneer SX 750.  She set it up with her TV...house already wired so she just had to plug it in.  She is trying to figure out if there is a way to hook up a remote control.  Anyone know if this is possible?

Look on eBay for a Chase RLC-1 remote. You can find them for less than $200. I have three of them now on vintage systems. Love them!
post #13864 of 13872
Quote:
Originally Posted by levlhed View Post
 

See if the TV has a setting for variable line level output.  With that the volume goes up and down with the TV remote instead of being constant full blast line level output.

Otherwise, you are buying a separate line level attenuation box with a remote.

I'm assuming you are running an RCA cord from an output on the back of the TV to an aux input on the SX-750.

 

Coming up on 48 hours of burn-in on my Marantz 1060, getting better and better.

 

If the TV has an optical out, it could be hooked up to a DAC with a remotely-operated attenuator as well.

post #13865 of 13872

Hey guys I have a quick question for you regarding headphones and amplifier synergy. I own a pair of HD 600, HE-400, and Mad Dogs. While I am aware that planar magnetic cans love vintage gear and the power associated with them, I've heard it's not as simple with dynamic drivers. I'm wondering if the HD 600 generally pairs well with vintage gear. Here are the amps I have at the moment.

 

Pioneer SA-7800

 

Kenwood KA-3500

 

Now I am aware that most people on this thread might not have any experience with these amps. But the headphone outs on both these units have ample power, especially for orthos. I've tried them with the HD 600 and both sound great. But I'm a little curious if it would be worth jumping to a dedicated amp like the Schiit Vali or Asgard 2. I've only had the Senns for a few weeks and I'm trying to get as much as I can out of them. What are your opinions on the matter? Thanks!

post #13866 of 13872
Quote:
Originally Posted by mike34260 View Post
 

Hey guys I have a quick question for you regarding headphones and amplifier synergy. I own a pair of HD 600, HE-400, and Mad Dogs. While I am aware that planar magnetic cans love vintage gear and the power associated with them, I've heard it's not as simple with dynamic drivers. I'm wondering if the HD 600 generally pairs well with vintage gear. Here are the amps I have at the moment.

 

Pioneer SA-7800

 

Kenwood KA-3500

 

Now I am aware that most people on this thread might not have any experience with these amps. But the headphone outs on both these units have ample power, especially for orthos. I've tried them with the HD 600 and both sound great. But I'm a little curious if it would be worth jumping to a dedicated amp like the Schiit Vali or Asgard 2. I've only had the Senns for a few weeks and I'm trying to get as much as I can out of them. What are your opinions on the matter? Thanks!

You may get a cleaner, more balanced sound with a dedicated amp but it all depends on what sound you are after. The HD600 are pretty neutral in my book, so if you are after a bit more fullness and bass response then the high impedance powerful vintage amps will give you this. I used to have the Asgard 1 and I personally wouldn't pair it with the 300 ohm hd600, I think it is better suited with lower impedance cans, it was also quite a brightly lit amp. I haven't heard the Vali but I have read that it is a good match the Senn's. Most decent tube amps are. I also think that vintage amps with headphones are very much like tube amps... Only without the messing with tubes! I've never heard a modern SS amp sound tube-like. When I say 'tube-like' I don't mean 'warm' with low level distortions etc, It is the sweet treble and depth of image.    

 

Because you are coming from vintage to a dedicated amp, you may very well be impressed with the sound. I went from dedicated amps to vintage and I've never looked back. But I love the sound of the 70's in general and am willing to sacrifice a completely black background for a smoother more natural sound (to my ears). 

 

If someone asked me how I would feed the HD600- My answer would be tubes or vintage :)

post #13867 of 13872

Hi,

 

as long as the phones are high impedance (say 200 ohms or higher), most vintage amps will be fine. The point with low impedance headphones is that most vintage amps use the power amp with a resistor as a headphone out and the resistor gives this headphone out a pretty high output impedance which will not work well with low impedance phones.

 

Joachim

post #13868 of 13872

The Pioneers that I've owned gave me an audible hiss with the hd6x0, but otherwise sounded very nice together. This can usually be eliminated with an annenuator.

post #13869 of 13872

Picked up a Pioneer SX-980 last week. It was pretty dirty but it's beautiful now! repainted the rear grill etc. I've replaced all the bulbs but the main bulbs (I have replaced with the correct value 8v 300ma) are turning the clear plastic piece above them white and the middle one is melting the rubber 'AUX' indicator light holder. LED bulbs for some dumb reason are $15 a piece for the main bulbs. If it gets any worse I suppose I'll have to buy the dumb $15x3 LEDs... 

post #13870 of 13872
Quote:
Originally Posted by LugBug1 View Post
 

You may get a cleaner, more balanced sound with a dedicated amp but it all depends on what sound you are after. The HD600 are pretty neutral in my book, so if you are after a bit more fullness and bass response then the high impedance powerful vintage amps will give you this. I used to have the Asgard 1 and I personally wouldn't pair it with the 300 ohm hd600, I think it is better suited with lower impedance cans, it was also quite a brightly lit amp. I haven't heard the Vali but I have read that it is a good match the Senn's. Most decent tube amps are. I also think that vintage amps with headphones are very much like tube amps... Only without the messing with tubes! I've never heard a modern SS amp sound tube-like. When I say 'tube-like' I don't mean 'warm' with low level distortions etc, It is the sweet treble and depth of image.    

 

Because you are coming from vintage to a dedicated amp, you may very well be impressed with the sound. I went from dedicated amps to vintage and I've never looked back. But I love the sound of the 70's in general and am willing to sacrifice a completely black background for a smoother more natural sound (to my ears). 

 

If someone asked me how I would feed the HD600- My answer would be tubes or vintage :)

Thank you very much for the info! I started out with a Magni for the HE 400 and initially I thought it was great. Then later on I got the idea to plug my orthos into my vintage gear and was blown away. So I sold the Magni because it just couldn't keep up. Yesterday I bought a Vali so I am anxious to hear it with the Senns, I always wondered what tubes were like so this should be a good entry level amp.

post #13871 of 13872
Quote:
Originally Posted by harrinj View Post

Picked up a Pioneer SX-980 last week. It was pretty dirty but it's beautiful now! repainted the rear grill etc. I've replaced all the bulbs but the main bulbs (I have replaced with the correct value 8v 300ma) are turning the clear plastic piece above them white and the middle one is melting the rubber 'AUX' indicator light holder. LED bulbs for some dumb reason are $15 a piece for the main bulbs. If it gets any worse I suppose I'll have to buy the dumb $15x3 LEDs... 

Congrats on the 980! Nice piece. That seems odd that the correct bulbs would be melting anything. Are they positioned correctly?
post #13872 of 13872

Thank you :) Yes they are, The new ones though seem a bit brighter than the one working of the three original ones that were in there. 

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Headphone Amps (full-size)
Head-Fi.org › Forums › Equipment Forums › Headphone Amps (full-size) › Calling All "Vintage" Integrated/Receiver Owners