Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Driver Polrity for AKG Sextetts
New Posts  All Forums:Forum Nav:

Driver Polrity for AKG Sextetts

post #1 of 2
1/25/11 at 3:30pm
Thread Starter 

Hey guys,

 

I'm currently in mode of recabling my Sextetts MP and had a simple question regarding the polarity of the solder tabs on the drivers.

 

There is no marking for + or - but there is a "dot" next to the stock RED wire and a "2" marking next to the white wire. I know red is usually positive but I just want to make sure that this is correct.

 

The only real answer I could find here is this picture but it has a question mark (green driver).

 

1000x500px-LL-a189c8b0_vglmyw.jpg

 

Thanks for the help and I greatly appreciate all of your help guys!

Reply
post #2 of 2
1/27/11 at 8:41am

polarity doesn't usually matter as long as they are both the same, those drivers should have - marks near one of the terminals so you can orient them in the same direction

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Driver Polrity for AKG Sextetts