Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › Grado Fan Club!
New Posts  All Forums:Forum Nav:

Grado Fan Club! - Page 677

post #10141 of 18038
Quote:
Originally Posted by wje View Post
 

 

While that Jaben cup has been around for a while, I'm not too fond of the color.  In fact, the color looks kind of sissy compared to the anodized nuts picture that I posted earlier. :D

 

 

yeah  it looks like pretty pink...

post #10142 of 18038
Quote:
Originally Posted by joseph69 View Post
 

Hey guys, received the Ear+HD today. To my surprise when I turned it on (without a source at the input) I have a terrible popping/interference noise at 0 volume. Then I realized with the RS's plugged in either high/low-Z I had to turn the volume to the max to hear at a relatively mid level volume. Then I noticed the 1x12AX7 tube was not glowing at all.

Aout an hour later I returned home and turned the amp back on (12AX7 still not glowing), but through either the high/low-Z the volume was correct this time, but still have terrible noise at 0 volume, and no glowing from the 12AX7.

Has anyone experienced these problems before with this amp?

Can the 12AX7 be causing all of these problems? I also don't have another to swap out.

Any help/thoughts on this would be greatly appreciated being this is a brand new amp and I couldn't wait to receive it, its pretty upsetting, as of now. Thanks.

 

 

has anyone owned both the LD1+ and the ear+HD? Can you do some comparisons? it seems that these are the two most favorited and decisively decided "best" headphones amps for grados/magnums. I would like to hear from someone who can directly compare/contrast them....

post #10143 of 18038
Quote:
Originally Posted by BillsonChang007 View Post

Otherwise, they can just cover the grills with some newspaper then work on it smily_headphones1.gif

Why not try sending an email to Grado and see what they suggest you to do as they know the best and it's not at all a pain! I tried sending an email to them once on my issue and they replied within 24hours which is good! And they don't torture you at all... They try their best to help! [no, I am not paid to write this xD it is really my own opinion just in case you are worried about anything ]

This i'll definitely do. Grado made them, so surely they'll know what to do.
Quote:
Originally Posted by fleasbaby View Post


On the RS2's, its sacrilidge, I know, but you could wrap tape/foam stripping around the outside of the driver to get a nice snug fit again...

Failing that, Mr. Chang is right, Grado's Customer Service is miles ahead of anyone else's. They have put up with my crap on a regular basis biggrin.gif

They stay fit, thanks to their wiring, Joseph69 mentioned using hot glue, and i might do that.
Quote:
Originally Posted by wje View Post

Since those PS-1000 cups are aluminum, I'd consider the anodizing process.  Lots of sweet colors for potential here.  The Gold is pretty sharp -- as is the black, too.  Or, just basic silver.

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), quality = 80

I would love to do this, if they weren't one of the early models, it feels wrong to change them that much :X (but oh man, it's tempting)
Quote:
Originally Posted by joseph69 View Post

You may want to use a 3M Scotch-Brite pad on them, and them afterwards an aluminum polish, they should come out beautiful. The Scotch-Brite pad will definitely take the lettering off though! 

I use a hot glue gun to secure my drivers in their cups, it works excellent.

Regarding the polishing: i'm going to contact Grado first, see what they think. I really want the lettering to stay.
Regarding the hot glue: i think that's a good idea.
Quote:
Originally Posted by gefski View Post

I keep a tube of MAAS in my hi-fi drawer and another in the garage for automotive use. It polishes bare metal (not clearcoated) to a beautiful luster (any good silver/metal polish should work well). The fine abrasive in these polishes is plenty; I wouldn't use an abrasive pad.

Don't know about survival of the lettering however.

Thanks for the suggestion, i'll contact Grado first, see how the lettering was done...

Quote:
Originally Posted by joseph69 View Post

I only said to possibly use a Scotch-Brite pad being that the clear coat looks removed already, and I've used it on aluminum engine case covers on V-Twin engines, and it comes out beautiful. Afterwards you can clear coat it if you would like, so you don't have to keep maintaining the aluminum.
WJE came up with the best solution, which would be to anodize them.

I think they were originally clear coated, so i will clear coat them again.
As i stated above, i donmt want to ruin the lettering, on such an early model i want to keep it in it's most original condition as possible...
post #10144 of 18038
Quote:
Originally Posted by Melvins View Post
 

 

 

has anyone owned both the LD1+ and the ear+HD? Can you do some comparisons? it seems that these are the two most favorited and decisively decided "best" headphones amps for grados/magnums. I would like to hear from someone who can directly compare/contrast them....

I am copying my response that I wrote just recently from the MAD Ear thread from the headphone amps forum.

 

I would say yes, there is a significant difference. I was not blown away , when I first heard it, but I did think it was better than the LD1+.  Now that I have heard it more,  I think it is safe to say that I am blown away.....I love it!

 

For me, I seem to need awhile with my cans and amps to really let it sink in and to adjust to the difference ....it takes me awhile to really soak it all in.

 

I feel pretty much the way that most people explained the RS1i & MAD EAR combo to me.....it just sounds magical....great synergy, indeed. Guitars have never, ever, ever sounded better :-)

 

I have not listened to my LD1+ since I have received this amp.

 

I will say that I did plug my AKG  Q701 into the MAD EAR today, and they sounded nice, but the same magic does not exist as with the RS1i. It does not even compare, IMHO.

 

I can't say whether the MAD EAR +HD is worth the six or seven times the cost of the LD1+.....but it is significantly better.

 

I really can not imagine anybody owning and RS1 not really enjoying what they would hear from this amp

 

I think I can honestly say, that if I had to live with this combo from now until doomsday....that I would be very happy.

 

I may add the PS500 at some point to my RS1i and Q701.....but I don't see this amp going anywhere!

 

The biggest difference that I notice are the highs are just completely silky, silky smooth, with all of the detail intact.

 

The instrument separation & detail are both also better.

 

That being said....the LD1+ is one heck of an amp for the price, and I still have mine.

 

Also, I have only listened thru the MAD Ear with my RS1i, I have not tried any other Grado headphones.

 

There are so many amps out there today and new ones popping up every couple months, so I am sure that there are many that work great with the low impedence of Grado cans.

 

I guess the MAD Ear is considered old school by todays standards....but the synergy with the RS1i is real.


Edited by whirlwind - 10/26/13 at 4:31am
post #10145 of 18038
Quote:
Originally Posted by CH23 View Post

This i'll definitely do. Grado made them, so surely they'll know what to do.
They stay fit, thanks to their wiring, Joseph69 mentioned using hot glue, and i might do that.
I would love to do this, if they weren't one of the early models, it feels wrong to change them that much :X (but oh man, it's tempting)
Regarding the polishing: i'm going to contact Grado first, see what they think. I really want the lettering to stay.
Regarding the hot glue: i think that's a good idea.
Thanks for the suggestion, i'll contact Grado first, see how the lettering was done...
I think they were originally clear coated, so i will clear coat them again.
As i stated above, i donmt want to ruin the lettering, on such an early model i want to keep it in it's most original condition as possible...

My in-laws are nuts for antiques, and I learned the golden rule from them: never, ever restore something if it's still original, no matter how banged up it is...and if you must, keep all work to an absolute minimum.

That said, Frank Lloyd Wright isn't around to repair and refinish like Joe and Joseph Grado are smily_headphones1.gif
post #10146 of 18038

I also posted this in the Mad Ear+Purist HD Appreciation thread. Although I have a bad 12AX7 tube in my new Ear+HD (a new tube is on the way) that is causing intermitting distortion/popping, this amp really woke up the RS1i's, and I've only listened to it for about 4hrs and it needs to burn-in, and a new tube. When it doesn't act up it already has a beautiful, warm but lively natural sound in every way, very smooth so far. I'm glad I made the move and went with the RS1i's and Ear+HD, for sure! I was very hesitant (price wise). I already have the SR80i/325is's and the LD1+/Schiit Magni/Modi, and thought to myself how much more musical can this combo be compared to these combos I already have and enjoy very much? So I had to hear this combo for myself. When it comes to hearing music, you don't hear what others hear so its very hard to make a purchase on other peoples opinions. After reading countless positive posts, I went for it and I'm so glad (already) I went with this combo. From the little time I've spent with this combo, I really can't explain the musical enjoyment that I'm hearing so far. Thanks to everyone who recommended this beautiful combo, you were all 100% right with your opinions. Thanks again!

post #10147 of 18038
Quote:
Originally Posted by joseph69 View Post
 

I also posted this in the Mad Ear+Purist HD Appreciation thread. Although I have a bad 12AX7 tube in my new Ear+HD (a new tube is on the way) that is causing intermitting distortion/popping, this amp really woke up the RS1i's, and I've only listened to it for about 4hrs and it needs to burn-in, and a new tube. When it doesn't act up it already has a beautiful, warm but lively natural sound in every way, very smooth so far. I'm glad I made the move and went with the RS1i's and Ear+HD, for sure! I was very hesitant (price wise). I already have the SR80i/325is's and the LD1+/Schiit Magni/Modi, and thought to myself how much more musical can this combo be compared to these combos I already have and enjoy very much? So I had to hear this combo for myself. When it comes to hearing music, you don't hear what others hear so its very hard to make a purchase on other peoples opinions. After reading countless positive posts, I went for it and I'm so glad (already) I went with this combo. From the little time I've spent with this combo, I really can't explain the musical enjoyment that I'm hearing so far. Thanks to everyone who recommended this beautiful combo, you were all 100% right with your opinions. Thanks again!


its really cool to see that you're so enthused !!

i wasn't familiar with the mapleshade amps until i had already gotten my lyr, if i had known , perhaps i would have pursued it.

having said that, i don't regret the lyr at all, i love it, and it will likely handle anything i could ever through at it, and it controls my psb's too.

i am also very happy i got  little dot again, and i may have spent a little too much on the telefunken tubes to go with it

but the tubes are dynamite, so, i'm a happy camper myself !

post #10148 of 18038
Quote:
Originally Posted by whirlwind View Post
 

I am copying my response that I wrote just recently from the MAD Ear thread from the headphone amps forum.

 

I would say yes, there is a significant difference. I was not blown away , when I first heard it, but I did think it was better than the LD1+.  Now that I have heard it more,  I think it is safe to say that I am blown away.....I love it!

 

For me, I seem to need awhile with my cans and amps to really let it sink in and to adjust to the difference ....it takes me awhile to really soak it all in.

 

I feel pretty much the way that most people explained the RS1i & MAD EAR combo to me.....it just sounds magical....great synergy, indeed. Guitars have never, ever, ever sounded better :-)

 

I have not listened to my LD1+ since I have received this amp.

 

I will say that I did plug my AKG  Q701 into the MAD EAR today, and they sounded nice, but the same magic does not exist as with the RS1i. It does not even compare, IMHO.

 

I can't say whether the MAD EAR +HD is worth the six or seven times the cost of the LD1+.....but it is significantly better.

 

I really can not imagine anybody owning and RS1 not really enjoying what they would hear from this amp

 

I think I can honestly say, that if I had to live with this combo from now until doomsday....that I would be very happy.

 

I may add the PS500 at some point to my RS1i and Q701.....but I don't see this amp going anywhere!

 

The biggest difference that I notice are the highs are just completely silky, silky smooth, with all of the detail intact.

 

The instrument separation & detail are both also better.

 

That being said....the LD1+ is one heck of an amp for the price, and I still have mine.

 

Also, I have only listened thru the MAD Ear with my RS1i, I have not tried any other Grado headphones.

 

There are so many amps out there today and new ones popping up every couple months, so I am sure that there are many that work great with the low impedence of Grado cans.

 

I guess the MAD Ear is considered old school by todays standards....but the synergy with the RS1i is real.

 

 

ahh that's awesome. thanks man! i appreciate it. i wonder if anyone else here can compare/contrast the two..

post #10149 of 18038
Quote:
Originally Posted by BillsonChang007 View Post

Blue or Purple xD label it with "PS1000 by Justin Bieber LE" sure you will get a lot of love as well as hate xD

 

OK.  I think we've got that onez covered.  :D

 

 


Edited by wje - 10/26/13 at 4:28pm
post #10150 of 18038

^^  Aw man....that is good stuff  ^^     :beerchug:

post #10151 of 18038
Quote:
Originally Posted by wje View Post

OK.  I think we've got that onez covered.  biggrin.gif




biggrin.gif Insert JB's name on the headphone and packaging: + $200
JB's favorite color: +$100

Total amount for a JB Edition of SR60i + retailing + commission: $399
post #10152 of 18038
post #10153 of 18038
Quote:
Originally Posted by fleasbaby View Post
 

Gentlemen, we're all aiming way too low:

 

http://www.selectism.com/2012/12/10/dolce-gabbana-by-grado-labs-mahogany-wood-headphones/

 

wtf

post #10154 of 18038
Quote:
Originally Posted by fleasbaby View Post
 

Gentlemen, we're all aiming way too low:

 

http://www.selectism.com/2012/12/10/dolce-gabbana-by-grado-labs-mahogany-wood-headphones/

 

 

It looks like back in 2012 when those headphones were created, they were aiming for a price of 800 Euros.  When you do the conversion now, it just equates to about $1,104.  This is just $105 more than the current list of $999 on the GS-1000i in the U.S.   I would have thought a designer label would have commanded a bit more.

post #10155 of 18038
Quote:
Originally Posted by wje View Post
 

 

OK.  I think we've got that onez covered.  :D

 

 


awwwwww, that's the schizzzzniiiiittttttt

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Headphones (full-size)
Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › Grado Fan Club!