Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › Show us your Head-Fi station at it's current state. No old pictures please...
New Posts  All Forums:Forum Nav:

Show us your Head-Fi station at it's current state. No old pictures please... - Page 746

post #11176 of 18664
Quote:
Originally Posted by StudioSound View Post


I'm at a complete loss for words here. Totally speechless.

I think I need to stay out of this topic for the sake of my sanity.

 

Any good judgement you may have had was already missing. At least protect your sanity from escaping you, too.wink_face.gif By not listening carefully, you rushed in to enlighten me over a problem you saw as not being fully understood by me. Rather than understanding it from an enhancement point of view. 

 

You should post new pix of your own and/or make meaningful contributions to this wonderful thread. Your attempts to ridicule fell flat; DOA. As Currawong pointed out last night, this isn't the thread for your attempts. Yet, you posted anyway...rolleyes.gif 

post #11177 of 18664

I would love to see some more current Head-Fi station photos...

post #11178 of 18664

New output tubes (6GL7s) added since yesterday...
post #11179 of 18664

My first rig:

 

 

 

More pics down in my sig:

post #11180 of 18664
Quote:
Originally Posted by Grevlin View Post

My first rig:





More pics down in my sig:
I like it!
post #11181 of 18664
Quote:
Originally Posted by V-Duh View Post

I would love to see some more current Head-Fi station photos...

 

The old...

 

Warning: Spoiler! (Click to show)

900x900px-LL-ea976232_IMG_5327.jpeg

 

From left to right:

Koss something, Grado something, AKG K240 Sextett MP, Beyer DT880 (250 ohm?), Beyer DT250 (250 ohm), Audio Technica ATH-A900, Pioneer HDJ-200, Sennheiser HD25-1-ii, AiAiAi TMA-1, V-Moda M80, Beyerdynamic DT1350, Beyerdynamic T50p, Realistic Pro30, Jana Labs BJ-2000 (I love that name)

 

at bottom: Ortofon EQ7, Shure SE215

 

Not shown: who knows anymore

 

The new...

 

Warning: Spoiler! (Click to show)

LL

 

From left to right:

Fostex T50rp (my own mods w/J$ Beyer pads), V-Moda Crosfade (w/T50rp drivers), Fostex T50rp (modified BMF DBV3), Fostex T50rp (BMF DBV#3 on loan), HiFiMAN HE-6

 

Not shown:

Fostex T50rp biggrin.gif

 

amps: Nuforce Icon2 speaker amp (for the HE-6), Nuforce HDP (to feed the Icon2 and for regular headphones), Nuforce LPS (power supply for the previous two, and spdif bridge for the HDP)

 

post #11182 of 18664

Hifiman EF2a and AKG 271mkII's
post #11183 of 18664

While I have no opinion on the effect of vibration dampening on digital audio, I would like to point out that you, Silent One, are being extremely condescending to those who have questions about your rig, and there is no need for you to be so.

 

While I have not heard your system and therefore have no right to comment on it, you have to admit that it is a point worthy of contention as the very fine points of audio hardware are quite subject to FUD. What could have been an opportunity to educate us on how and why it makes a difference, instead turned into you egging on the naysayers by being the type of person most people like to prove wrong.

 

We are all here for the same thing and we are all eager to learn more about our hobby. There is no need for such attitude on anyone's part.

 


 

As for my actual hardware, I may post later, but it is quite difficult to get a good shot because my room has very, very poor lighting, and as a result, makes everything inside of it unphotogenic.

post #11184 of 18664
Quote:
Originally Posted by Grevlin View Post

My first rig:

 

More pics down in my sig:

Very tasteful first rig. Good stuff!

post #11185 of 18664

One issue may be the fact that people would want him to educate every time he posts a picture of his rig. I vaguely remember him going fairly in depth one of the first times he posted it. 

 

At this point he'd have to write a lecture every time he posts in this thread. He's probably just gotten tired of defending it and become snarky. :D

 

Quote:
Originally Posted by Tus-Chan View Post

While I have no opinion on the effect of vibration dampening on digital audio, I would like to point out that you, Silent One, are being extremely condescending to those who have questions about your rig, and there is no need for you to be so.

 

While I have not heard your system and therefore have no right to comment on it, you have to admit that it is a point worthy of contention as the very fine points of audio hardware are quite subject to FUD. What could have been an opportunity to educate us on how and why it makes a difference, instead turned into you egging on the naysayers by being the type of person most people like to prove wrong.

 

We are all here for the same thing and we are all eager to learn more about our hobby. There is no need for such attitude on anyone's part.

post #11186 of 18664
Quote:
Originally Posted by LugBug1 View Post

Very tasteful first rig. Good stuff!


Thanks

 

My next project is getting a Turntable rig together in the next few weeks.

post #11187 of 18664
Quote:
Originally Posted by Tus-Chan View Post

While I have no opinion on the effect of vibration dampening on digital audio, I would like to point out that you, Silent One, are being extremely condescending to those who have questions about your rig, and there is no need for you to be so.

 

While I have not heard your system and therefore have no right to comment on it, you have to admit that it is a point worthy of contention as the very fine points of audio hardware are quite subject to FUD. What could have been an opportunity to educate us on how and why it makes a difference, instead turned into you egging on the naysayers by being the type of person most people like to prove wrong.

 

We are all here for the same thing and we are all eager to learn more about our hobby. There is no need for such attitude on anyone's part.

 


 

As for my actual hardware, I may post later, but it is quite difficult to get a good shot because my room has very, very poor lighting, and as a result, makes everything inside of it unphotogenic.

 

Sorry, this view isn't correct. Anyone care to read conversations from the beginning, as opposed to the latest posts? You'll see that I was patient and engaged any and everyone, despite this being a picture thread. I was polite at every turn, even after the original antagonist suggested that I didn't understand computers and computer audio. Or what the heck I was doing.

 

We can agree to disagree but I take exception to being portrayed as condescending. 

 

FURTHER Comments anyone? Please PM me. This invite was kindly expressed earlier as well...

 

Kind Regards,

 

S.O.

post #11188 of 18664
Quote:
Originally Posted by I right I View Post


You deserve the praise. That's super cool. I'm going to copy the $hit out of that for my office! I hope you don't mind...

Nah, I don't mind at all. I am wondering if it is funner to see the stand being used for HP, or emptying the bottle to get the stand.. I just might have to start a big collection of headphones, just so I can get more stands.....=P

post #11189 of 18664
Quote:
Originally Posted by Armaegis View Post

 

V-Moda Crosfade (w/T50rp drivers)

Interesting, I hadn't heard you did that. Got a thread on it?

post #11190 of 18664
Quote:
Originally Posted by Tus-Chan View Post

While I have no opinion on the effect of vibration dampening on digital audio, I would like to point out that you, Silent One, are being extremely condescending to those who have questions about your rig, and there is no need for you to be so.

 

While I have not heard your system and therefore have no right to comment on it, you have to admit that it is a point worthy of contention as the very fine points of audio hardware are quite subject to FUD. What could have been an opportunity to educate us on how and why it makes a difference, instead turned into you egging on the naysayers by being the type of person most people like to prove wrong.

 

We are all here for the same thing and we are all eager to learn more about our hobby. There is no need for such attitude on anyone's part.

 

I really don't feel that Silent One has been condescending. People are questioning his dampening, and he's answering each and every one of them. S.O. has to defend his setup, and to put real soul behind any argument, you have to truly believe in your side. He certainly does :P Also, being rude isn't an effective way to stop snobbishness. Let's get back to sharing rig pics. 


Edited by wes008 - 2/13/13 at 3:40pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Headphones (full-size)
Head-Fi.org › Forums › Equipment Forums › Headphones (full-size) › Show us your Head-Fi station at it's current state. No old pictures please...