Head-Fi.org › Forums › Sponsor Announcements and Deals › HOT **New** Moon-Audio.com Silver Dragon IEM Cable!!!
New Posts  All Forums:Forum Nav:

HOT **New** Moon-Audio.com Silver Dragon IEM Cable!!!

post #1 of 146
Thread Starter 

Silver Dragon IEM Replacement Cables Version 1 $175-$205   

 

Silver%20Dragon%20LOGO.jpg
     

 

**Please reply DIRECTLY to this thread if you are interested in preordering and Moon Audio will contact you soon.

 

The Silver Dragon IEM headphone cable is the baby brother to the Silver Dragon Headphone cable. We have designed if for use with In Ear monitors were light weight and flexibility are a must. Examples of the in ears this cable can be used with are: the JH Audio Custom molded JH16 & JH13 in ear monitors, LiveWires Custom molded in ear monitors, Shure SE535 and SE425, Ultimate Ears UE18 Pro and UE11 Pro and Westone Elite Series ES3X just to name a few.

The Silver Dragon IEM is a coaxial design using a 99.99998% UP-OCC Stranded Silver 26AWG center conductor for the positive leg. The center conductor uses the same Kevlar reinforcing as the other Dragon cables. The center conductor is wrapped concentrically by a 99.99998% UP-OCC silver plated single crystallized UP-OCC pure copper stranded 26AWG  gauge conductor with 7N purity 99.99998%. Now that is a mouth full:)

the left and right signal cables run parallel to each other resulting in a very low inductance. Both signal jackets are polyethylene.The cable is extremely flexible yet very resiliant and resistant to flex failure.

A variety of connection options are available for your downstream connection. Such as the mini plug, RCA, XLR and a whole host of others. We custom build these in house to your connection specification.

The cable can be used in either a single ended or balanced design. The wire is soldered to a connectors using high quality Cardas silver solder.

 

 

SD3IEM_JH_RSA_2small.jpg
    
 
Pricing has been established and preordering can can now begin!!!  We hope to have the first production run in about 6-8 weeks depending on holiday slow down. We will be ordering 3 lengths and we will also make available custom extension cables for home use. Details on these to follow on the website.

 

 SD3IEM_JH_1small.jpg
 

We have designed the Silver Dragon IEM Cable for use with In Ear monitors where light weight and flexibility are a must. Examples of the in ears this cable can be used with are: the JH Audio Custom molded JH16 & JH13 in ear monitors, LiveWires Custom molded in ear monitors, Ultimate Ears UE18 Pro and UE11 Pro and Westone Elite Series ES3X just to name a few.

 

JH Audio, Ultimate Ears, Westone Connection
 
48 inches                            $175
64 inches                            $190
80 inches                            $205

 
 
Prices above are for Single ended versions
They come stock with a Premolded right angled Mini Plug
Add $10 for Oyaide Rhodium Plated straight or right angled 1/8" mini plug
Add $10 for RSA Protector or SR71B Plug.

Add $10 for iBasso hirose connector.
Add $5 for Moon Audio female 1/8" Female to 1/4" Male Adapter Plug
Add $10 for Mini 4pin Male XLR for adapter systems
Add $25 for Dual 3pin male or Female Neutrik XLRs
Add $125 For Furutech Rhodium Plated XLRs
   


Edited by drubrew - 1/31/11 at 4:00pm

Thank You. Drew Baird, P.E. Moon Audio 308 Chrismill Lane Holly Springs, NC 27540 919-649-5018 drew@moon-audio.com http://www.moon-audio.com Moon...

Reply
post #2 of 146

Great news and very reasonable price.

Is there a photo of the cable with the Premolded right angled Mini Plug?

 

Also, will any Blue Dragon IEM cables be available?


Edited by kayser - 12/7/10 at 2:23pm
post #3 of 146

Hi Drew, please put me on the pre-order list for the 80" with Oyaide plug. Thanks! :)

 

BTW, are the Moon Audio 1/8" to 1/4" adapters different from "off the shelf" adapters? I'm usually wary of using such adapters as it doesn't make sense to me to put a cheap adapter in the path of high quality cables, but sometimes there is a practical need to and I've been looking for a practical solution .... 

post #4 of 146

I'm interested in a 48" terminated in a Hirose balanced plug (for iBasso balanced amps), will happily pay $10 extra

post #5 of 146

I will wait for the review compare to the Craig's cable 

Great news indeed !!

:)

post #6 of 146
Thread Starter 


I'll try to get a picture up of the Premolded plug soon. I am a bit overwhelmed with holiday rush orders. So not a lot of free time. The plug is identicle to the JH Audio molded plug if that helps. Yes in about 6 months there will be a Blue Dragon. We will also be making molds for other phones like Shure and such.
 

Quote:
Originally Posted by kayser View Post

Great news and very reasonable price.

Is there a photo of the cable with the Premolded right angled Mini Plug?

 

Also, will any Blue Dragon IEM cables be available?

Thank You. Drew Baird, P.E. Moon Audio 308 Chrismill Lane Holly Springs, NC 27540 919-649-5018 drew@moon-audio.com http://www.moon-audio.com Moon...

Reply
post #7 of 146
Thread Starter 

Mine are good quality but still not as good as say the Oyaide or Furutech plugs. No one makes a good one. Cardas had one but mechanically it kept failing. Someday we may have a good solution. What I do for folks is make an adapter system with Mini XLRs as seen Here. Then they can get adapter cables with better plugs for all of their connection needs.

 

Quote:
Originally Posted by jermng View Post

Hi Drew, please put me on the pre-order list for the 80" with Oyaide plug. Thanks! :)

 

BTW, are the Moon Audio 1/8" to 1/4" adapters different from "off the shelf" adapters? I'm usually wary of using such adapters as it doesn't make sense to me to put a cheap adapter in the path of high quality cables, but sometimes there is a practical need to and I've been looking for a practical solution .... 

Thank You. Drew Baird, P.E. Moon Audio 308 Chrismill Lane Holly Springs, NC 27540 919-649-5018 drew@moon-audio.com http://www.moon-audio.com Moon...

Reply
post #8 of 146

I would love to see a set of these made up for the Sennheiser IE8... but I do realize that's a totally different plug at the IEM body... Making these cables for phones with common plugs is more beneficial I'm sure.

post #9 of 146

interested! emailed a couple questions.  one that a few others may wonder is about the ibasso hirose connector. how much extra (if you have access to them) would that be?

post #10 of 146
Thread Starter 

Revised the connector options. Forgot the iBasso. We can also do our adapter system system with mini 4pin XLRs.

 

Quote:
Originally Posted by debitsohn View Post

interested! emailed a couple questions.  one that a few others may wonder is about the ibasso hirose connector. how much extra (if you have access to them) would that be?

Thank You. Drew Baird, P.E. Moon Audio 308 Chrismill Lane Holly Springs, NC 27540 919-649-5018 drew@moon-audio.com http://www.moon-audio.com Moon...

Reply
post #11 of 146
Quote:
Originally Posted by drubrew View Post

Mine are good quality but still not as good as say the Oyaide or Furutech plugs. No one makes a good one. Cardas had one but mechanically it kept failing. Someday we may have a good solution. What I do for folks is make an adapter system with Mini XLRs as seen Here. Then they can get adapter cables with better plugs for all of their connection needs.



How much would an adapter system like that cost?

post #12 of 146

An IE8 one would be nice =)

post #13 of 146

Hi Drew,

 

Please put me on the pre-order list for two 48" JHAudio cables, one with Oyaide Rhodium Plated right angled 1/8" mini plug, and another with RSA Protector plug.
 

Thanks!

post #14 of 146

edited


Edited by debitsohn - 12/26/10 at 7:33am
post #15 of 146
48" with oyaide right angle adapter please.
Edited by jc9394 - 12/22/10 at 5:05pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sponsor Announcements and Deals
Head-Fi.org › Forums › Sponsor Announcements and Deals › HOT **New** Moon-Audio.com Silver Dragon IEM Cable!!!