Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Problem with TPA Buffalo 24 DAC after wiring
New Posts  All Forums:Forum Nav:

Problem with TPA Buffalo 24 DAC after wiring

post #1 of 4
10/7/10 at 4:51pm
Thread Starter 

Just finished the wiring for my b24, all the wires are correct, yet sound doesnt come from right channel, I measured no voltage output from the right se on the IVY. and there're constant 'pop' sound on the left.

Could anyone guide me where to check first? I'm using it with the hiface as transport.

Many thanks!

Reply
post #2 of 4
10/9/10 at 3:11am
Thread Starter 

Problem solved thanks to Russ!

Reply
post #3 of 4
10/9/10 at 6:44am

Out of curiosity, what was wrong? Maybe it will help someone else down the line not have to make the call or email...

Reply
post #4 of 4
10/9/10 at 5:08pm
Thread Starter 

Wrong wiring~ make sure you use at least more than 2 different colors, and dont put anything conductive nearby, I forgot a piece of solder under the dac board and it made those pop sounds 

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Problem with TPA Buffalo 24 DAC after wiring