New Posts  All Forums:Forum Nav:

FS: Jolida JD202 stereo integrated amplifier - MINT!

post #1 of 4
Thread Starter 

 

Jolida JD202
 

 

Up for grabs is my Jolida JD202 integrated amp in MINT condition!  Comes with upgraded EH EL34 tubes and Tungsol 12ax7s.  The 12AT7s are stock.  MINT condition - less than 30 hours total time on it.  Come get it!  PayPal please.  Split shipping. $649.00 save a couple hundred bucks!


Description :
The Jolida JD202 delivers 40 watts per channel into 8 ohms from 30hz to well above 20khz. At 1khz, the amplifier can deliver up to 60 watts per channel. Distortion is below 1% at 30 watts from 40hz to 14khz. It provide good imaging, with instruments convincingly presented across the soundstage.

 

Construction Details and Features :
- Fully Integrated Stereo Amplifier: Input 350mV driving 40 watts, maximum 50 watts output.
- Multiple Inputs: Front mounted selector switch-CD, Tuner and Aux (for TV, DVD Player, VCR or computer).
- Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design.
Secondary can be configured for a 4 ohm or 8 ohm load.
- State of the Art Components: ALPS or Panasonic audio potentiometer, gold plated RCA input jacks, gold plated five way speaker connectors.
- Low Feedback Design: Only 9 dB.

 

Specifications :
Maximum Power Output....................60 W per channel at 8 ohms, 1KHz
Rated Output Power..........................40 W per channel at 8 ohms, 30Hz to 80KHz
Frequency Response........................(at 1 watt into 8 ohms) 7Hz to 140KHz + 3dB; 0dB at 1KHz
Bandwidth........................................17Hz to 140KHz + 3dB; 0dB = 40 W 1KHz, 8 ohms
Distortion THD + N...........................Less than 1% at 30W output, 40Hz to 14KHz, 8 ohms
Circuit Type.....................................Ultra Linear, Class AB1
Input Impedance...............................100Kohms
Input Sensitivity................................Max. 350mV at 1KHz for 40 watt output
Output Impedance............................4 ohms and 8 ohms
Negative Feedback...........................Less than 9 dB
Noise and Hum................................80dB below rated output.
Tube Complement.............................2 matched pairs (4) of 6CA7/EL34 power output; 2 pcs. 12AX7A pre-amplifier, 2 pcs. 12AT7 power drivers.
Power Requirements.........................110V-120 VAC 60Hz 120 watts-standby, 300 watts maximum (220 VAC 50Hz option).
Bias Settings...................................40 millivolts + 4 mV
Fuse...............................................110-120 VAC, 6.3 Fast Blo; 200-240 VAC, 3 Amp Fast Blo
Dimensions(w x d x h)......................30 x 31 x 21cm
Weight............................................13 kg

 

 

104_0654.JPG104_0653.JPG
 


Edited by jpstereo - 10/4/10 at 3:10pm
post #2 of 4
Thread Starter 

up!

post #3 of 4
Thread Starter 

up!!

post #4 of 4
Thread Starter 

^^^

New Posts  All Forums:Forum Nav:
  Return Home