For sale is my last uncased AlienDAC that I recently built and tested. I bought boards and all ICs for this DAC maybe four years ago, during one of the group buys. They sat in my basement until I decided to start working on a GrubDAC+SSMH this summer, so I picked up the rest of the parts and practiced my SMD soldering technique on these Aliens. This is the third of the bunch, and only differs from the other two in its power cap.
Specs:
Elna RFS Silmic IIs - 47uF 35V in positions C23/C33 (tombstoned), 10uF 35V in positions CL/CR.
Panasonic FM 1200uF 16V, tombstoned over IC1 and the crystal
United Chemi-Con 47uF 10V in position C13
Most of the rest of the parts were sourced in this BOM - http://spreadsheets.google.com/pub?key=tqYZPI8B3bdfGhcQVQTnyjg&output=html
This is the regulated USB version, adjusted to around 4.8V, if I remember correctly.
YOU WILL NEED:
some form of output (either a mini jack, or two RCA jacks. I have soldered wires to the outputs)
a case (ideal case is a Hammond 1455C801, but these will fit into any altoids-tin sized case)
an LED (non-essential).
your own USB A-B cable (I don't have any to spare 
)
Pics can be seen here:
http://picasaweb.google.com/submergence/AlienDAC3?authkey=Gv1sRgCKmL7Zvf3ZbbzQE&feat=directlink
Asking $SOLD
For reference, the other two I sold are here . I wasn't planning on selling this last one, and wanted to keep it as a reference and portable DAC. Funny how plans change so quickly 
Edited by Ikarios - 9/7/10 at 4:15pm
