Head-Fi.org › Forums › Equipment Forums › Headphone Amps (full-size) › Connecting Graham Slee Novo to Onkyo 875 - please help!
New Posts  All Forums:Forum Nav:

Connecting Graham Slee Novo to Onkyo 875 - please help!

post #1 of 10
8/5/10 at 3:54pm
Thread Starter 

Hi all,

 

I have an Onkyo 875 av receiver to which I have various sources connected and have recently purchased a Graham slee novo. I have tried simply connecting the novo to the preouts for the front L and R channels on the back and get no sound from the headphone amp at all. I have also tried connecting it to the TAPE OUT and still nothing.  In essence I am simply using the onkyo as a switch for the various sources and would like the sound to come from the novo to my headphones. Any idea what I need to do to achieve this? I couldnt find in the onkyos menu system, the way to get it to output the signal to via the preouts/tape out to the headphone amp. If anyone has experience with this or similar models, please could you let me know. Thank you

Reply
post #2 of 10
8/6/10 at 10:45am
Thread Starter 

anyone have any experience with this?

Reply
post #3 of 10
8/6/10 at 4:11pm

Sounds like you need to change to either stereo mode or change the Aux/DVD/ etc mode.

Reply
post #4 of 10
8/7/10 at 12:55pm
Thread Starter 

Thanks for the reply HDMan. I have tried putting it into stereo mode (and even plugged in another set of headphones into the onkyo so it should simply be passing out stereo). Apologies but I dont understand what you mean by changing the Aux/DVD etc mode - how do i do this? 

Reply
post #5 of 10
8/7/10 at 4:10pm

What are the formats of your audio input sources?

 

I've been thinking about a similar setup -- hooking a headphone amp to my Onkyo 906.  From what I can glean from the 906 manual, its audio switching function is only like-to-like, thus using analog Tape-Out would not work for Coax/Optical/HDMI digital sources, but I assume that Pre-Out should work with all sources but have not been able to determine if Pre-Out signals are always present or Pre-Out mode needs to be explicitly selected.


Edited by lyramax - 8/7/10 at 4:12pm
Reply
post #6 of 10
8/7/10 at 4:19pm

What is your input source? How are you connecting it?

 

Download this Maual for the 875, go to page 52. You must select your digital input source.

 

http://www.manualnguide.com/download/manual-guide/onkyo-tx-sr875-av-receiver-owners-manual.html

 

 


Edited by HDMan - 8/7/10 at 4:32pm
Reply
post #7 of 10
8/8/10 at 3:19am
Thread Starter 

I currently have multiple sources connected to the onkyo:

 

ps3 via hdmi

xbox 360 via component (for video) and optical for sound

bluray - hdmi

pc (audio only) via coaxial

 

I have been using this same setup for around 3 years now and the digital input screen you mention above HDMan, is set fine. As I have previously been using the headphone out from the onkyo and have had no problems, is something different required if i wanted to use the preout?

Reply
post #8 of 10
8/8/10 at 3:34am

Have you tested the HP Amp on another system?

 

Have you tried the pre-outs with another Amp?

 

Could be faulty. Other than that I don't know anything else.

Reply
post #9 of 10
8/8/10 at 6:23am
Thread Starter 

The headphone amp works fine if i connect the ps3 av out ie scart using the red and white rca's. but this defeats the point of the receiver as a source switch. So I dont believe it to be a faulty head amp just that maybe that the preouts arent working on the onkyo or that there is some setting that i have inadvertently changed over the last 3 years that needs to be reset. 

Reply
post #10 of 10
8/8/10 at 10:57am

I think you would have a better shot at getting your question re: Pre-Out usage answered if you post it on a discussion board such as the Onkyo-875 Owner Discussion thread of the AVS forums: http://www.avsforum.com/avs-vb/showthread.php?t=876635

Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Headphone Amps (full-size)
Head-Fi.org › Forums › Equipment Forums › Headphone Amps (full-size) › Connecting Graham Slee Novo to Onkyo 875 - please help!