Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › need length of grado rs1 wood cups
New Posts  All Forums:Forum Nav:

need length of grado rs1 wood cups

post #1 of 7
7/9/10 at 3:25pm
Thread Starter 

like so :)

 

img8523b.jpg

Reply
post #2 of 7
7/9/10 at 3:55pm

:)

 

If my annoying popup didnt popup click Link

HTML Hit Counter
HTML Hit Counter


Edited by nikongod - 7/9/10 at 3:56pm
Reply
post #3 of 7
7/9/10 at 4:34pm
Thread Starter 

need just the cup though :(

Reply
post #4 of 7
7/9/10 at 6:02pm

The RS-1 cups are 1 piece from end to end. If you are trying to copy the length measure and copy what you have now.

 

You can kind of see it here.

 

aDSC_0011.jpg?t=1278723612

Reply
post #5 of 7
7/9/10 at 6:28pm
Thread Starter 

1 piece is easy already made a few but all different lengths.

 

so still need length.

Reply
post #6 of 7
7/12/10 at 10:30am
Thread Starter 

bump

Reply
post #7 of 7
7/12/10 at 10:48am

Surely you have your own ruler and pencil&paper. Someone else telling you the dimensions of the cups wont necessarily get you your desired total length if the length of the inner cylinders are different. I have not measured, I dont know if they are or not... do you?

 

Measure the length of the plastic (or wood in the case of HF1/2) cylinder that the driver is mounted in. Subtract that from the total length. This is the inner step where the cylinder that the driver is mounted in butts up against. Add a little bit for the skirt that overhangs the cylinder, this is another place its good to take your own measurement.

 

Or liberate the drivers from the plastic thing and make 1 piece cups like the RS-1 do. I cut them out. carefully.

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › need length of grado rs1 wood cups