Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › DT770/600 recable help please
New Posts  All Forums:Forum Nav:

DT770/600 recable help please

post #1 of 4
6/13/10 at 11:10am
Thread Starter 

I've done a few recables but there is something I don't want to screw up here. These have some resisters that I'm not sure if I need to keep.

Is this the same as the others models- disregard the middle (red) and use the left side (blue) as + and the right side (copper) as ground?

Can someone walk me through this?

 

 

 

P1020655.JPG

Reply
post #2 of 4
6/13/10 at 12:19pm

They are diodes not resistors. Best to keep them. As for polarity, an easy way to check is to use the continuity function on your multimeter with one of the probes hooked up to the L or R or ground portion of the plug and the other probe hooked up to one of the three wires/contact on the driver.

Reply
post #3 of 4
6/13/10 at 12:22pm

which ever side the yellow mark is , is +

Reply
post #4 of 4
6/13/10 at 12:58pm
Thread Starter 

Great thanks guys- I did some test with the multimeter and noticed the yellow mark figuring it was + (why not red?).

Listening to them now and they sound great- a decent improvement across the board mainly due to them being balanced now I am guessing. Impressive sound for $170 and spare parts.

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › DT770/600 recable help please