Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › gamma2 volume imbalance
New Posts  All Forums:Forum Nav:

gamma2 volume imbalance

post #1 of 3
Thread Starter 

I just finished building gamma1 and 2 and the gamma1 by itself works fine, balanced volume. When I use the gamma2 the left channel is louder than right channel (even with mono music). Ive tried both the stereo and red/white output and the left is a lot louder. Ive tried searching through the gamma2 thread but nothing comes up.  Any suggestions?

post #2 of 3

Check for cold solder problems at the opamp and DAC chip output pins, and possible wrong-value resistors on one channel only.

post #3 of 3
Thread Starter 

thanks amb i got it to work after resoldering the opamp. the gamma2 sounds great!

New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › gamma2 volume imbalance