New Posts  All Forums:Forum Nav:

wanted, E2C's or similar for parts

post #1 of 5
4/9/10 at 4:54pm
Thread Starter 
My excellent sounding E2C's have developed a short at the plug. Since they work fine otherwise I can't see sending them in for replacement at approximately $80 plus after S/H both ways.

If anyone has a pair of quality broken earbuds (shot ear speaker maybe?) that uses the same 3 wire plug, please contact me to discuss. These do have a ground to each speaker (not visible as a 3rd wire of course to the plug) compared to cheaper buds only using 2 wires. Maybe this will work out for 2 headfiers to benefit.

Thanks for reading.

PS, check my feedback if curious.
Reply
post #2 of 5
4/9/10 at 7:03pm
You should just get the plug replaced....if you can't do it yourself there are many capable folks here that would do it for a reasonable charge.
Reply
post #3 of 5
4/10/10 at 12:59pm
i can give you a working pair of e2c's with no accessories, case included for $30. Shipping included
lucky if they have done 50 hours. They have been sitting in a drawer for about 3 years doing nothing.
Reply
post #4 of 5
4/10/10 at 11:53pm
Thread Starter 
thanks for the advice, and the offer from scotland? Nice of you folks to offer assistance. I was contacted by another fellow headfier that sounds like a pair of shurs are going to be arranged and splicing a jack will not be necessary.

Again, thanks
Reply
post #5 of 5
4/11/10 at 9:45pm
Thread Starter 

problem solved

Thanks Ian for setting me up with a fresh pair of buds. I'm back in business.
Reply
New Posts  All Forums:Forum Nav:
  Return Home