Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Passive stereo summing circuit
New Posts  All Forums:Forum Nav:

Passive stereo summing circuit

post #1 of 4
4/5/10 at 11:24am
Thread Starter 
Anyone have a circuit for converting stereo to mono for a small desk radio amp? Only requirements are its passive and only costs a few bucks from mouser or digikey. Just twisting the left and right together doesnt sound like a good idea
Reply
post #2 of 4
4/5/10 at 11:29am
Is $10.50 (+S&H) too much?

The Edcor WSM6400 transformer may be exactly what you are looking for.

They sell them all built as the S2M for about $23.

Edited:
I found this thread elsewhere after googling "passive stereo summing circuit" LMGTFY
link
You will may need to tweak the resistor values given, they seem correct for sources that can drive 600ohm loads, probably not so good for consumer grade gear.

The rane pages are consistently awesome, and I found them through a different thread found through that search.
link to awesomeness.
Reply
post #3 of 4
4/5/10 at 1:59pm
Couldn't you tie the two channels together through a couple of resistors?
Reply
post #4 of 4
4/5/10 at 2:36pm
Quote:
Originally Posted by nikongod View Post
The rane pages are consistently awesome, and I found them through a different thread found through that search.
link to awesomeness.
awesome site! Thanks for posting =)
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Passive stereo summing circuit