Hey Joker,
I'm dying for your R-50 review. When are you planning to review it?
Hey Joker,
I'm dying for your R-50 review. When are you planning to review it?
Nice thread!!
Not married to dual BA drivers, just want to try the different technology. I was thinking that dual drivers provide a more accurate sound. Maybe i should stick with something more mainstream like the MEe A151's to see the difference between balanced armature and dynamic drivers?

Not married to dual BA drivers, just want to try the different technology. I was thinking that dual drivers provide a more accurate sound. Maybe i should stick with something more mainstream like the MEe A151's to see the difference between balanced armature and dynamic drivers?
To me dual BA's are more full sounding compared to singles along with better soundstage size. A really good cheap in price not in performance dual BA is the R-50 which sounds as good as most IEM's costing twice as much.
I'm doing one of my standard Head-Fi reviews but I have a bunch of stuff I want to send to Tyll for measurement including the 334. If he likes it maybe we'll do an IF piece as well.
I have no plans to add the R1 at this time. I've heard it briefly and did not think it was as good as their M5, which is still not as much to my liking as the GR06.
SHE3580
Quote:

Hey joker :D
I've been down and back with a few IEMs recently, and I was wondering if there were any IEM's you can think of that are extremely similar to the Tributes in sound? I have a pair, but one driver is substantially quieter than the other (assuming they are defective) and I but them used so the warranty won't be of use. I would buy another pair, but I honestly hated the weight of the driver coupled with the relatively insecure fit of the IEM.
Essentially have you heard of IEMs with a similar sound signature and similar sound quality to the Miles Davis Tributes
Can't think of anything extremely similar to the Tributes but depending on what you like about them you might enjoy one of the higher-end JVC dynamics or maybe the EPH-100.
It should be the next one posted.


Not married to dual BA drivers, just want to try the different technology. I was thinking that dual drivers provide a more accurate sound. Maybe i should stick with something more mainstream like the MEe A151's to see the difference between balanced armature and dynamic drivers?
The entry-level BAs typically have much more glaring weaknesses than the mid-level ones. Signatures also vary quite a bit--the entry-level BAs I like (A151, Rock-It R-20/R-30, Astrotec AM-90, etc) tend to be warmer and smoother than most higher-end ones. If you want to really try an armature but still have reservations I would recommend something decent in the ~$100 range - an A161P, Ety HF5, Phonak 022, Brainwavz B2, Rock-It R-50, etc. Less of an investment than going all out at $200 and you shouldn't lose a whole lot on resale value if you don't like them.
Really looking forward to the review of the FitEar 334, SHE3580, and UE700. I will also drop a look at the TF10 review (if it comes out XD) the IE7, and MDR-7550.
And you might want to remove the AKG K330 from your list of planned reviews.

Comply T100, Ts100 or (best) P of the right size. (e.g. included one) However, the IEM is not really sibilant, but has lots of 4.5k edge, very wide ridge too. Far too much, about 20 dB with silicone and 14 dB with Comply. It can't even be equalized out, since it's too long resonance.
S2 has a great DAC, but too high output impedance for B2, which happens to exaggerate the rigde even more, furthering soundstage collapse.
(TW)FK sound is a "biting" sound - it has huge unnatural sharpness to it.

Triple-flange tips plus a deep insertion or Comply tips just stuffed in your ear. I am not familiar with the S2 or new Clips. If the output impedance of the Galaxy is on the high side that might be a problem and would not be an issue with the Clip.
Why?
Thanks, good to know.
joker, for the two question I asked your below, you mentioned that the difference between K3003 and FX700 is a bit smaller between FX700 and Monster Turbine Copper.
I remember when i first listen to FX700, the immediate difference was more timbre and clarity. It was more 3D.
I'm not sure about your definition of "noticeably better". I think it's noticeable. Pretty much everything is better except isolation. I guess I was being a little harsh saying that it's a little better. I just think that FX700 is a good step up for me from Monster Turbine Copper if the price is within $150, which it is.
For the other question I asked you, you pointed out that it's difficult to justify the price difference between FX700 and K3003. But what I'm surprised is that you stated that you can't determine the difference between these two IEMs from memory. That means the difference between these two IEMs are really really small?
I see that in the reviews, you gave K3003 a 9.6 and FX700 a 9.3 in sound quality. Is that actually the difference? 
For Copper, you gave 8.8. Between FX700 and Copper, I can see/hear the 0.5 difference, even from memory.
I just want to make sure that if I can't really tell the difference between FX700 and K3003 from memory, then it's probably not worth getting it then. By memory, I mean like say, listening to FX700 for a day or week. Move on to K3003 the next day or week, I want to think to my myself that, "hmm, the AKG sounds better. The treble is better, more extension. Bass is deeper, more detailed. The midrange is not laid back and etc."
Probably a little smaller. I think the FX700 is noticeably better than the Copper but as you've noted the difference between them still isn't that big, especially without comparing them side by side.
Quote:
Probably not on the second question. The K3003 does have certain advantages - slightly better clarity from the BA driver due to the thinner note presentation, better imaging, and impressive treble extension, for example, but it would be difficult to justify the price difference if you've already got an FX700.
I think this question has been sufficiently answered. I don't know how good your audio memory is so I really can't speak for that and the scores pretty much tell the rest of the story.
The V3 is the most efficient of those if you're worried about getting the most out of your customs with your phone but I don't think an iPhone 4/5 will have trouble with any of these. It really depends on what you want signature-wise. If you're not sure then the V3 is probably safest.