iPhone cable (with mic) for UE or JH IEM's - Page 7

The Logitech + Ultimate Ears cable looks perfect.

Quote:

Originally Posted by neozecat 

Anyone did try this and can give feedback ?

 

 

 

http://social.logitechue.com/promos/inline-remote-and-microphone-cable-for-custom-in-ear-monitors/

What's the difference between the models before and after Sep 1, 2010? It seems the cable only works for the new UE iem. Would it be the same as other models (JH, w4r, etc.)?

The termination between the cable and the IEM is significantly different.

Quote:

Originally Posted by boonh 

What's the difference between the models before and after Sep 1, 2010? It seems the cable only works for the new UE iem. Would it be the same as other models (JH, w4r, etc.)?

Quote:

Originally Posted by rekkanoken 

The termination between the cable and the IEM is significantly different.

 

So can it be used with ASG-1 or w4r?

Quote:

Originally Posted by boonh 

So can it be used with ASG-1 or w4r?

If I'm not mistaken, the newer UE cables should not work with the ASG or W4.  Look at the JH or Westone cable, they should be compatible. 

Quote:

Originally Posted by JeremyLaurenson 

Anyone got close up pictures of the UE new style connector... Is this the same simple trim job?

<>

Looks like it:

Do you know if this cable with the remote would fit the Triple-Fi 10s? Also do you know much about its durability?

Quote:

Originally Posted by Derlus 

 

Do you know if this cable with the remote would fit the Triple-Fi 10s? Also do you know much about its durability?

I actually have this cable for my TF10, it does fit but I would advise against it cause the pin doesn't go in too far so it's not really that secure. I guess if the pins go in tightly then it'll be okay.

Is there a way I could mod them to make them fit snugly? Like filing down the edges or something?
 

just bought the cable at http://goo.gl/jXVsk The seller modified the cable with connections for my JH16pro IEMs. I am happy with the quality. The headphone jack is from a Sennheiser cable (has Sennheiser stamped on it), and the iPhone controls are from stock iPhone cables (indistinguishable from the controls on the earbuds that came with my iPhone5). The sound quality is indistinguishable (or maybe a little more bass) than the stock JH Audio cables.

I had previously used a cable made for UE IEMs mentioned earlier in this thread, but those cables did not fit as snugly into the IEMs as these. Every once in a while, the old cables would slip out, but these fit snugly & I can't imagine them accidentally slipping out.

Another option to consider.

Hope this helps someone.
 

Cable seems very durable. The connectors are attached well. The headphone jack is ripped from a Sennheiser cable. And my old cable that I cut down from a TF10 would sometimes slip out of the IEM (especially in my pocket, etc). I was always scared of dropping one IEM when taking them out of my pocket because the connector had slipped out of the IEM. These insert snugly and I can't imaging them falling out.

Sound is also a little better than the stock JH audio cable (better bottom end).

Time will tell how long the iPhone control lasts. My last custom cable like this (see earlier in the thread) used a Skullcandy iPhone control that eventually stopped being "clicky". It still worked, but the action was mushy. It would pause (1 press) instead of skip (2 presses) often.
 

Hot damn, the JH Audio control is a MONSTER!

Quote:

Originally Posted by SkyyBoy 

just bought the cable at http://goo.gl/jXVsk The seller modified the cable with connections for my JH16pro IEMs. I am happy with the quality. <<<SNIP>>>

 

I just ordered one, and will also post my impressions of it... This ships from HK, so it'll be a while.