Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Please help me troubleshoot Millett Max issue (no output)
New Posts  All Forums:Forum Nav:

Please help me troubleshoot Millett Max issue (no output) - Page 2

post #16 of 18
2/18/10 at 12:43am
Thread Starter 
Thanks for all the help.

I confirmed with the seller that he biased the tubes at 13.5 volts before he shipped it out. I will however make sure that those settings did not change during the shipping process.

As for the issue I was having earlier...I don't know why sound didnt come out at all when I first set it up.

However, I removed the tubes, and reset them FIRMLY and then sound came out of just one ear. Then I removed the tubes and switched them and sound came out of both ears.
Reply

Head-Fi's Best Sellers

post #17 of 18
2/18/10 at 2:09am
The tubes are obviously different so you need to bias them in the correct position.
Reply
post #18 of 18
2/18/10 at 3:04am
Thread Starter 
I plan on doing this in the morning.

Thanks for all of the advice!
Reply
New Posts  All Forums:Forum Nav:
  Return Home

Head-Fi's Best Sellers

Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Please help me troubleshoot Millett Max issue (no output)