Pix:
http://www.head-fi.org/forums/f6/pos.../index410.html Post #6148.
This is an EHHA I that I built. I have made a couple of changes since these pix were taken (I would post new pix, but since Photobucket is constantly
changing their format, that's not possible now).
The signal wiring in now Cardas (4x24 shielded in, 2x24 from stepper
to boards, #22 chassis wire from boards to output and used for signal
chassis ground).
The heatsink for the heater regulator board is now black. (Not painted,
replaced.)
Included tubes are the 6GM8's.
As you can see, I overdrilled the hole for the output jack. The void is
filled with alum. foil. The overall appearance of the front panel is
typical Par-Metal, so it's not perfect.
I rearranged my listening space, and now don't need two amps.
I'm keeping the Bijou, so this one can go to a new home.
I have $350 invested in this, so that is what I would be looking to get,
plus shipping. Please PM me if you have any questions. Thanx for looking.
http://www.head-fi.org/forums/f6/pos.../index410.html Post #6148.
This is an EHHA I that I built. I have made a couple of changes since these pix were taken (I would post new pix, but since Photobucket is constantly
changing their format, that's not possible now).
The signal wiring in now Cardas (4x24 shielded in, 2x24 from stepper
to boards, #22 chassis wire from boards to output and used for signal
chassis ground).
The heatsink for the heater regulator board is now black. (Not painted,
replaced.)
Included tubes are the 6GM8's.
As you can see, I overdrilled the hole for the output jack. The void is
filled with alum. foil. The overall appearance of the front panel is
typical Par-Metal, so it's not perfect.
I rearranged my listening space, and now don't need two amps.
I'm keeping the Bijou, so this one can go to a new home.
I have $350 invested in this, so that is what I would be looking to get,
plus shipping. Please PM me if you have any questions. Thanx for looking.
