Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Can you identify the radius of this connector?
New Posts  All Forums:Forum Nav:

Can you identify the radius of this connector?

post #1 of 14
1/1/10 at 11:04pm
Thread Starter 
http://www.neutrik.com/Secure30/getM...pplication/pdf

I believe it is a 3mm radius. Could someone confirm if this is correct, thank you.
Reply
post #2 of 14
1/1/10 at 11:15pm
Corner radius?
Reply
post #3 of 14
1/1/10 at 11:17pm
I think he means the TRS radius, which is 3.175mm or 0.125"
Reply
post #4 of 14
1/1/10 at 11:19pm
Which radius were you wanting?

It's for a 1/4" (6.35mm) TRS plug.

The actual radius of the hole in front is 3.25mm if that's what you're looking for.

Edit: If you're wanting the corner radius, it's 3.5mm.

se
Reply
post #5 of 14
1/1/10 at 11:21pm
Corner radius of those two holes are approximately 0.14" / 3.56mm.
Reply
post #6 of 14
1/1/10 at 11:54pm
Thread Starter 
Sorry I should have been clearer. I am looking for the corner radius of the "rectangle".
Reply
post #7 of 14
1/1/10 at 11:57pm
For front panel express?

Edit: the attachemt is an FPE macro that was floating a couple of years ago.
LL
Reply
post #8 of 14
1/2/10 at 12:16am
Thread Starter 
Quote:
Originally Posted by MisterX View Post
For front panel express?

Edit: the attachemt is an FPE macro that was floating a couple of years ago.
Thank you so much, that is exactly what I was looking for. Don't suppose the forums has a repository of FPE macros? Would be very useful.
Reply
post #9 of 14
1/2/10 at 12:21am
There were a few other macros and HPGL files posted but looks like they all died in the big crash a couple of years ago.
Reply
post #10 of 14
1/2/10 at 12:29am
Thread Starter 
Quote:
Originally Posted by MisterX View Post
There were a few other macros and HPGL files posted but looks like they all died in the big crash a couple of years ago.
Oh that is a shame, maybe someone could start of thread to rebuild the data. I bet many people have ones laying around such as the one you posted.

I noticed that the tolerance in that macro is 1mm, is that a pretty standard tolerance to put on FPE? The rest of my items I was using 0.5mm, should I bump them to 1mm?
Reply
post #11 of 14
1/2/10 at 1:49am
Quote:
Originally Posted by MisterX View Post
For front panel express?

Edit: the attachemt is an FPE macro that was floating a couple of years ago.
I was just looking for this! Thanks!!
Reply
post #12 of 14
1/2/10 at 3:43am
Quote:
Originally Posted by m1abrams View Post
I noticed that the tolerance in that macro is 1mm, is that a pretty standard tolerance to put on FPE? The rest of my items I was using 0.5mm, should I bump them to 1mm?
I would stay at 0.5mm. The last panel work FPE did for me was accurate down to 0.001 inch.
Reply
post #13 of 14
1/2/10 at 3:54am
Quote:
Originally Posted by m1abrams View Post
Oh that is a shame, maybe someone could start of thread to rebuild the data. I bet many people have ones laying around such as the one you posted.
That's a really nice idea! When I get back home from vacation, I can upload some of the graphics I have used.
Reply
post #14 of 14
1/5/10 at 3:16pm
Thread Starter 
If you guys could help me confirm one more thing before I order my panel.

This panel is for the front of a Par metal series 20 12"x8"x3" case.

I have the spacing between the mounting holes as being 285mm on the width and 51mm on height. Are my figures right for this case? I am pretty confident on the 51mm figure because I can do a 1:1 print and visually compare that one, I can not print 285mm so that one I was not able to make that confirmation.
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Can you identify the radius of this connector?