Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Recomendation for Internal Cable
New Posts  All Forums:Forum Nav:

Recomendation for Internal Cable

post #1 of 3
Thread Starter 
Hello

I'm looking for your help to buy some good cable for internal conecctions in an amp for Power and for RCA plugs and banana speakers post. Thanks a lot
post #2 of 3
Use something that conducts electricity and can handle the current requirements of your application. Otherwise it doesn't really matter.
post #3 of 3
TimmyMac's reply is one end of the spectrum. I'll shoot for the middle

Perhaps its paranoia, but for any box w/A/C in it I like to use shielded cable for any lengthy A/C runs (e.g. to front panel pwr switch, of course considering load) and same for any lengthy low/line-level runs. Maybe like Mogami Neglex cable people like to use for headphone re-cables.

Think I'm in the minority in doing this. Gives me peace of mind that if I ever were to hear hum from any of my builds it would not be because of the wire I used
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Recomendation for Internal Cable