Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › one 48inch 1080i monitor VS two 22 in LCD's LATENCY/BEST for audio
New Posts  All Forums:Forum Nav:

one 48inch 1080i monitor VS two 22 in LCD's LATENCY/BEST for audio

post #1 of 8
11/15/09 at 2:20am
Thread Starter 
i am using a mac pro with quad core 3.67 ghz and 6G ram. I currently am using 2 22 inch monitors side by side connected via DVI..I would prefer to have just one bigger monitory and want to use my hitachi 1080i hd 48 inch instead. 2 questions
1. Is it easier on my cpu to have this one big monitor or the two
2. Will i need a special graphics card to use the 48 inch(suggestions greatly appreciated) ......As far as the graphics card goes...
a. i am using this for audio(pro tools). WHAT IS THE BEST CARD/WAY TO DO THIS TO NOT TAX MY CPU AND GET GREAT RESOLUTION?
b. what is the best way to connect to my tv?..HDMI?
Reply
post #2 of 8
11/15/09 at 2:44am
Probably a better question for Gear-Fi...

I'd stick with two monitors, after all, you do have two eyes. What you really need to focus on is reducing crosstalk, you'd be better off with a monoblock computer per screen. And then a third, independent computer to handle audio.
Reply
post #3 of 8
11/15/09 at 2:44am
if it is a 1080i, the highest resolution you can get is 1700x1080 (or so), which will have large grains on a 48" display.

2x22" can give you 3200x1200 total, much finer details.

Via DVI.
Reply
post #4 of 8
11/15/09 at 2:51am
Quote:
Originally Posted by Daveze View Post
Probably a better question for Gear-Fi...

I'd stick with two monitors, after all, you do have two eyes. What you really need to focus on is reducing crosstalk, you'd be better off with a monoblock computer per screen. And then a third, independent computer to handle audio.
your audio computer should run off lead-acid battery, much lower audiable noise, blacker background and more precise imaging.

You meant you have a stereo monitor system? SO Cool! I KNEW Mac will come up with something like that just to put us clumsy Windows7 PC users to shame .

To reduce visual cross talk, you can try putting a book in front of your nose to make sure one eye only sees one screen.
Reply
post #5 of 8
11/15/09 at 3:06am
Quote:
Originally Posted by bigpapajk View Post
2 questions
I see 4.

Also most of what you're asking is all based on preference. Personally I'd go with the 2 near-field monitors.
Reply
post #6 of 8
11/15/09 at 3:21am
Quote:
Originally Posted by Emooze View Post
I see 4.

Also most of what you're asking is all based on preference. Personally I'd go with the 2 near-field monitors.
I see what you did there.

Maybe OP is trollan. Maybe OP doesn't have a clue how computers work (Mac?). In any case, get multiple 24/27" monitors @ 1920x1600. You get pixels and size.

Quote:
2. Will i need a special graphics card to use the 48 inch(suggestions greatly appreciated) ......As far as the graphics card goes...
Macs just work.

Just.

That is to say, it depends on how many DVI outputs you have. If you don't have enough...


To be honest, I have no idea what to make of this thread, and why it's even in DIY.
Reply
post #7 of 8
11/15/09 at 3:55am
Why would you worry about the latency of a monitor when it comes to audio? Unless you're gaming and are able to detect <10ms lag times with your eyes, it shouldn't be an issue. If so, there are plenty of better forums to discuss computer monitor performance.

The video card in the Mac Pro should handle a 48" monitor just fine. Your CPU shouldn't be doing really any of the video rendering (as far as monitor display goes) so you will not see any difference between 1 or 2 monitors - it should all be handled by the GPU.

The Mac Pro has plenty of power to run Pro Tools. You should not need any additional power, and there are no "cards" that will make that program run better (it's entirely CPU dependent).

The best way to connect to your TV is to use whatever input your TV has. DVI or HDMI is fine, there won't be any real difference.

What WILL actually make a difference for audio on a Mac Pro is using an external DAC rather than the one built into the computer, such as a Bantam, Gamma1/2, etc.
Reply
post #8 of 8
11/15/09 at 4:30am
Try to connect your Mac to your 48" with the highest level connections you have. The grain or pixels can be a problem on a very big screen, but I've heard that by using lower level inputs you can alleviate the problem.
Just try not to spend too much while experimenting, K?
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › one 48inch 1080i monitor VS two 22 in LCD's LATENCY/BEST for audio