Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › KGBH - Searching for a BOM
New Posts  All Forums:Forum Nav:

KGBH - Searching for a BOM

post #1 of 9
11/12/09 at 5:31am
Thread Starter 
Hey guys, I recently got my hands on some BH boards. It's a build I plan to tackle later next year. In my research I've failed to stubble over any BOM's, so I'm looking for a little help from any members that may have one available.

Cheers
John
Reply
post #2 of 9
11/12/09 at 6:22am
The best one would be to read it off the pcb's you have and compare it with the schematic on Headwize.
That way you'll catch any errors.
Reply
post #3 of 9
11/12/09 at 7:16am
Thread Starter 
Quote:
Originally Posted by nattonrice View Post
The best one would be to read it off the pcb's you have and compare it with the schematic on Headwize.
That way you'll catch any errors.
Now you’ve foiled my lazy DIYers attempt at sponging off some else’s hard work.

Of cause I’d use the schematic as a check off list , but finding an existing BOM would be nice and handy...
Reply
post #4 of 9
11/12/09 at 9:13am
Well if you have the original boards (amp and psu) then I'm pretty sure that the resistors were sized to match the RN60/CMF60 Dale/Vishays.
For the non-0.25w resistors you can use dales or Kiwame ect.
The box film caps are (I'm pretty sure) 1Kv Wima or equivalent.
Also I believe Justin changed the 2SA1156's with 2SA1486's as the 56's will be operating very close to their 400v limit (they'll run uncomfortably hot).

Spritzer just build a BH so he'll be able to tell if I arsed any of that up =P

Edit: I forgot, you can also ditch the 2SK389 and just use the singles match really well (thermal epoxying them together is best for memory).
Reply
post #5 of 9
11/12/09 at 9:52am
Thread Starter 
Thanks Tom, that’s great info to have in here.
Reply
post #6 of 9
11/12/09 at 12:30pm
I'll send a PM this evening. You will have to update as necessary, but it will save you a bit of time... maybe.
Reply
post #7 of 9
11/12/09 at 4:46pm
Thread Starter 
Quote:
Originally Posted by pabbi1 View Post
I'll send a PM this evening. You will have to update as necessary, but it will save you a bit of time... maybe.
Thanks pabbi1!
Reply
post #8 of 9
11/12/09 at 5:47pm
So you're the guy who beat me to the boards! Good Luck and have fun!
Reply
post #9 of 9
11/12/09 at 8:18pm
Thread Starter 
Quote:
Originally Posted by les_garten View Post
So you're the guy who beat me to the boards! Good Luck and have fun!
Thanks les, sorry I think you got in just after...
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › KGBH - Searching for a BOM