Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Simple 2-way switcher-selector on relay.
New Posts  All Forums:Forum Nav:

Simple 2-way switcher-selector on relay.

post #1 of 2
10/19/09 at 2:14pm
Thread Starter 
Hello

I'm designing PCB for ZEN headAMP now...

It will have line input (2RCA) and transit line output (2RCA).

When Headamp is powered-off, line input is shorted to output, and signal flow from source to next amp through headamp's relay.

If Head amp is power on, than 12Volt are feeding switching relay and it switch signal from line in to headamp.

The relay is Takamisawa NA12W-K
Datasheet can be found here:
http://www.hifituning24.de/downloads/na.pdf

I have never used relays, so don't know how to use it correctly. Please help me...

Here is my suggestion:


If it's ok? Or maybe it need some delay circuit? Some caps, resistors?
Reply
post #2 of 2
10/19/09 at 2:34pm
Looks fine to me just as it is. A very simple, elegant solution.

se

Reply
New Posts  All Forums:Forum Nav:
  Return Home
Head-Fi.org › Forums › Misc.-Category Forums › DIY (Do-It-Yourself) Discussions › Simple 2-way switcher-selector on relay.